J.I. Case 2294

J.I. Case 2294The J.I. Case 2294 is a 2WD or 4WD row-crop tractor from the 94 series. This tractor was manufactured by J.I. Case in Racine, Wisconsin, USA during 1984. The J.I. Case 2294 is equipped with an 8.3 L (504.0 cu·in) six-cylinder diesel engine and a three-speed power shift transmission with 12 forward and 3 reverse gears.

The Case 2294 row-crop tractor used the Case engine. It is a 8.3 L, 8,259 cm2, (504.0 cu·in) six-cylinder turbocharged diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 15.8:1. This engine produced 156.1 PS (114.8 kW; 154.0 HP) at 2,100 rpm of output power.

The J.I. Case 2294 is equipped with power steering, differential hydraulic wet disc brakes, four-post ROPS or Silent Guardian cab optional and 246.0 liters (65 US gal.; 54.1 Imp. gal) fuel tank.

J.I. Case 2294 Specifications

General Specifications
Model J.I. Case 2294
Length –
Width –
Height –
Wheel base 2,640 mm (103.9 in)
Weight (operating) 6,530 kg (14,396 lbs)
Fuel tank capacity 246.0 liters (65 US gal.; 54.1 Imp. gal)
Battery 12V
Cabin type Four-post ROPS or Silent Guardian cab optional
Engine
Engine model Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.3 L, 8,259 cm2, (504.0 cu·in)
Bore and stroke 117.0 mm X 127.0 mm (4.61 in X 5 in)
Compression ratio 15.8:1
Horsepower 156.1 PS (114.8 kW; 154.0 HP) at 2,100 rpm
Starter Electric
Oil capacity: 22.7 L (24 US. qt, 20 Imp. qt.)
Coolant capacity: 36.0 L (38 US. qt, 31.7 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Differential hydraulic wet disc
Transmission model –
Transmission type Three-speed power shift
Gears 12 forward and 3 reverse
Speed Forward: 29.1 kmh (18.1 mph) Reverse: 13.0 (8.1 mph)
Transmission oil capacity 94.6 L (25 US. gal, 20.8 Imp. gal.)
Tires
Front tires Ag: 11.00-16 (2WD), 14.9-28 (4WD)
Rear tires Ag: 18.4-38
Three-Point Hitch
Category II
Control type –
Lift capacity (at 610 mm/24 in) 2,993 kg (6,600 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with hydraulic clutch
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Closed center
Hydraulic capacity 94.6 L (25 US. gal, 20.8 Imp. gal.)
Pressure 2250 psi (155.1 bar)
Valves 2 to 4 (3 only with 4WD)
Pump flow 23.0 gpm (87.1 lpm)
Steering flow 8.0 gpm (30.3 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*