J.I. Case 2594

J.I. Case 2594The J.I. Case 2594 is a 2WD row-crop tractor from the 94 series. This tractor was manufactured by J.I. Case in Racine, Wisconsin, USA during 1984. The J.I. Case 2594 is equipped with an 8.3 L (504.0 cu·in) six-cylinder diesel engine and one of two transmissions: a three-speed power shift transmission with 12 forward and 3 reverse gears or a four-speed power shift transmission with 24 forward and 3 reverse gears.

The J.I. Case 2594 row-crop tractor used the Case engine. It is a 8.3 L, 8,259 cm2, (504.0 cu·in) six-cylinder turbocharged diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 220 PS (161.8 kW; 217.0 HP) at 2,100 rpm of output power.

The Case 2594 is equipped with power steering, wet disc brakes, Silent Guardian cab with air-conditioning, and 321.7 liters (85 US gal.; 70.8 Imp. gal) fuel tank.

J.I. Case 2594 Specifications

General Specifications
ModelJ.I. Case 2594
Width2,430 mm (95.7 in)
Wheel base2,990 mm (117.7 in)
Weight (operating)7,360 kg (16,226 lbs)
Fuel tank capacity321.7 liters (85 US gal.; 70.8 Imp. gal)
Cabin typeSilent Guardian cab with air-conditioning
Engine modelCase
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement8.3 L, 8,259 cm2, (504.0 cu·in)
Bore and stroke117.0 mm X 127.0 mm (4.61 in X 5 in)
Horsepower220 PS (161.8 kW; 217.0 HP) at 2,100 rpm
Oil capacity:28.4 L (30 US. qt, 25 Imp. qt.)
Coolant capacity:41.6 L (44 US. qt, 36.6 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typePower
BrakesWet disc
Transmission model
Transmission typeThree-speed power shift
Gears12 forward and 3 reverse
Speed Forward: 33.5 kmh (20.8 mph) Reverse: 11.7 (7.3 mph)
Transmission oil capacity121.0 L (32 US. gal, 26.6 Imp. gal.)
Transmission model
Transmission typeFour-speed power shift
Gears24 forward and 3 reverse
Speed Forward: 33.5 kmh (20.8 mph) Reverse: 11.7 (7.3 mph)
Transmission oil capacity121.0 L (32 US. gal, 26.6 Imp. gal.)
Front tires Ag: 11.00×16
Rear tires Ag: 20.8×38
Three-Point Hitch
Control type
Lift capacity (at 610 mm/24 in)3,515 kg (7,750 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent with hydraulic clutch
Rear PTO speed1,000 rpm
Hydraulic system
Hydraulic typeClosed center
Hydraulic capacity121.1 L (32 US. gal, 26.6 Imp. gal.)
Pressure2250 psi (155.1 bar)
Valves2 to 4
Pump flow27.0 gpm (102.2 lpm)
Steering flow8.0 gpm (30.3 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.