JCB Fastrac 1115S

JCB Fastrac 1115SThe JCB Fastrac 1115S is a four-wheel drive tractor manufactured by JCB from 1996 to 1998. The JCB Fastrac 1115S is equipped with a 6.0 L (365.2 cu·in) six-cylinder diesel engine and a synchromesh transmission with ceramic disc clutch and 36 forward and 12 reverse gears.

The JCB Fastrac 1115S four-wheel drive used the Perkins 1000-6 HR1 engine. It is a 6.0 L, 5,984 cm2, (365.2 cu·in) six-cylinder turbocharged diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 131.8 PS (96.9 kW; 130.0 HP) at 2,300 rpm of output power and 523.0 N·m (53.3 kg·m, 385.5 ft·lb) at 1,400 rpm of torque.

The JCB Fastrac 1115S is equipped with hydrostatic power steering, pneumatic dry disc brakes, Cab with air conditioning, and 220.0 liters (58.1 US gal.; 48.4 Imp. gal) fuel tank.

JCB Fastrac 1115S Specifications

General Specifications
Model JCB Fastrac 1115S
Length 5,150 mm (202.8 in)
Width 2,310 mm (90.9 in)
Height 2,790 mm (109.8 in)
Wheel base 2,790 mm (109.8 in)
Ground clearance 450 mm (17.7 in)
Weight 5,850 kg (12,897 lbs)
Fuel tank capacity 220.0 liters (58.1 US gal.; 48.4 Imp. gal)
Battery 12V, 83Ah
Cabin type Cab with air conditioning
Engine
Engine model Perkins 1000-6 HR1
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 6.0 L, 5,984 cm2, (365.2 cu·in)
Bore and stroke 100.0 mm X 127.0 mm (3.94 in X 5 in)
Horsepower 131.8 PS (96.9 kW; 130.0 HP) at 2,300 rpm
Torque 523.0 N·m (53.3 kg·m, 385.5 ft·lb) at 1,400 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 4WD
Steering type Hydrostatic power
Brakes Pneumatic dry disc
Transmission model
Transmission type Synchromesh with ceramic disc clutch
Gears 36 forward and 12 reverse
Tires
Front tires Ag: 480/70R28
Rear tires Ag: 480/70R28
Three-Point Hitch
Caterogy II or III (optional)
Control type
Lift capacity (at ends) 5,250 kg (11,575 lbs)
Front Hitch
Caterogy II
Lift capacity (at ends) 2,550 kg (5,625 lbs)
PTO (Power take-off shaft)
Front PTO type Independent
Front PTO speed 540/1,000 rpm
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity 75.0 L (19.8 US gal, 16.5 Imp. gal)
Pressure 3045 psi (210 bar)
Valves 2 or 3
Pump flow 19.6 gpm (74.2 lpm)
24.3 gpm (92 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*