JCB Fastrac 1135

JCB Fastrac 1135The JCB Fastrac 1135 is a 4WD four-wheel drive tractor manufactured by JCB from 1995 to 1998. The JCB Fastrac 1135 is equipped with a 6.0 L (365.2 cu·in) six-cylinder diesel engine and a synchromesh transmission with 36 forward and 12 reverse gears and ceramic disc clutch.

The Fastrac 1135 four-wheel drive tractor used the Perkins 1000-6 HR5 engine. It is a 6.0 L, 5,985 cm2, (365.2 cu·in) six-cylinder turbocharged diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 149.1 PS (109.6 kW; 147.0 HP) at 2,300 rpm of output power.

The JCB Fastrac 1135 is equipped with hydrostatic power steering, pneumatic dry disc brakes, cab with air conditioning, and 220.0 liters (58.1 US gal.; 48.4 Imp. gal) fuel tank.

JCB Fastrac 1135 Specifications

General Specifications
Model JCB Fastrac 1135
Length 5,150 mm (202.8 in)
Width 2,310 mm (90.9 in)
Height (cab) 2,790 mm (109.8 in)
Wheel base 2,790 mm (109.8 in)
Ground clearance 450 mm (17.7 in)
Weight 5,850 kg (12,897 lbs)
Fuel tank capacity 220.0 liters (58.1 US gal.; 48.4 Imp. gal)
Battery 12V, 83Ah
Cabin type Cab with air conditioning
Engine
Engine model Perkins 1000-6 HR5
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 6.0 L, 5,985 cm2, (365.2 cu·in)
Bore and stroke 100.0 mm X 127.0 mm (3.94 in X 5 in)
Horsepower 149.1 PS (109.6 kW; 147.0 HP) at 2,300 rpm
Torque 610.1 N·m (62.2 kg·m, 449.6 ft·lb) at 1,400 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 4WD
Steering type Hydrostatic power
Brakes Pneumatic dry disc
Transmission model
Transmission type Synchromesh with ceramic disc clutch
Gears 36 forward and 12 reverse
Tires
Front tires Ag: 480/70R28
Rear tires Ag: 480/70R28
Front Hitch
Category II
Lift capacity 2,550 kg (5,625 lbs)
Three-Point Hitch
Category III
Control type
Lift capacity (at ends) 6,000 kg (13,230 lbs)
PTO (Power take-off shaft)
Front PTO type Independent
Front PTO speed 540/1000 rpm
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity 74.9 L (19.8 US. gal, 16.5 Imp. gal.)
Pressure 3046 psi (210 bar)
Valves 2 or 3
Total flow 19.6 gpm (74.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*