The JCB Fastrac 185 is a four-wheel drive (4WD) tractor manufactured by JCB from 1994 to 1997. The JCB Fastrac 185 is equipped with a 5.9 L (358.8 cu·in) six-cylinder diesel engine and a synchromesh transmission with 36 forward and 12 reverse gears.
The JCB Fastrac 185 tractor used the Cummins 6 BTA engine. It is a 5.9 L, 5,879 cm2, (358.8 cu·in) six-cylinder turbocharged intercooled diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. This engine produced 190.7 PS (140.2 kW; 188 HP) at 2,400 rpm of output power.
The JCB Fastrac 185 is equipped with power assist steering, pneumatic dry disc brakes, Cab with air conditioning, and 280.0 liters (74 US gal.; 61.6 Imp. gal) fuel tank.
JCB Fastrac 185 Specifications
| General Specifications | |
| Model | JCB Fastrac 185 |
| Length | 5,760 mm (226.8 in) |
| Width | 2,360 mm (92.9 in) |
| Height | 2,970 mm (116.9 in) |
| Wheel base | 2,990 mm (117.7 in) |
| Ground clearance | 400 mm (15.7 in) |
| Weight | 6,500 kg (14,330 lbs) |
| Fuel tank capacity | 280.0 liters (74 US gal.; 61.6 Imp. gal) |
| Battery | Two 12V |
| Cabin type | Cab with air conditioning |
| Engine | |
| Engine model | Cummins 6 BTA |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 5.9 L, 5,879 cm2, (358.8 cu·in) |
| Bore and stroke | 102.0 mm X 120.0 mm (4.02 in X 4.72 in) |
| Horsepower | 190.7 PS (140.2 kW; 188.0 HP) at 2,400 rpm |
| Torque | 750.0 N·m (76.5 kg·m, 552.8 ft·lb) at 1,400 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 4WD |
| Steering type | Power assist |
| Brakes | Pneumatic dry disc |
| Transmission model | – |
| Transmission type | Synchromesh |
| Gears | 36 forward and 12 reverse |
| Tires | |
| Front tires | Ag: 520/70R30 |
| Rear tires | Ag: 520/70R30 |
| Three-Point Hitch | |
| Caterogy | III/IIIN |
| Control type | Electronic draft control |
| Lift capacity (at ends) | 7,000 kg (15,435 lbs) |
| Front Hitch | |
| Caterogy | II |
| Lift capacity (at ends) | 3,000 kg (6,615 lbs) |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent |
| Front PTO speed | 540/1,000 rpm |
| Rear PTO type | Independent with electro-hydraulic clutch |
| Rear PTO speed | 540/1,000 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Hydraulic capacity | 60.0 L (15.9 US gal, 13.2 Imp. gal) |
| Pressure | 3045 psi (210 bar) |
| Valves | 2 |
| Pump flow |
15.85 gpm (60.0 lpm) 20.3 gpm (76.8 lpm) |
| Total flow | 20.8 gpm (78.7 lpm) |
Be the first to comment