John Deere 1120

John Deere 1120The John Deere 1120 is a 2WD utility tractor manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1967 to 1975. The John Deere 1120 is equipped with a 2.7 L (164.5 cu·in) three-cylinder diesel engine and one of two transmissions with 8 forward and 4 reverse gears or with 16 forward and 8 reverse gears.

The JD 1120 utility tractor used the John Deere engine. It is a 2.7 L, 2,695 cm2, (164.5 cu·in) three-cylinder natural aspirated diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 51.7 PS (38.0 kW; 51.0 HP) at 2,500 rpm of output power and 49.4 N·m (5 kg·m, 36.4 ft·lb) at 1,350 rpm of torque.

John Deere 1120 Specifications

General Specifications
Model John Deere 1120
Length 3,420 mm (134.6 in)
Width
Height 2,540 mm (100 in)
Wheel base 2,050 mm (80.7 in)
Weight 2,520 kg (5,556 lbs)
Fuel tank capacity 62.5 liters (16.5 US gal.; 13.7 Imp. gal)
Battery Two 12V
Cabin type Open operator station
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.7 L, 2,695 cm2, (164.5 cu·in)
Bore and stroke 102.0 mm X 110.0 mm (4.02 in X 4.33 in)
Horsepower 51.7 PS (38.0 kW; 51.0 HP) at 2,500 rpm
Torque 49.4 N·m (5 kg·m, 36.4 ft·lb) at 1,350 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD
Steering type
Brakes
Transmission model
Transmission type
Gears 8 forward and 4 reverse
Transmission model
Transmission type
Gears 16 forward and 8 reverse
Tires
Front tires Ag: 7.50-16
Rear tires Ag: 13.6-36
Three-Point Hitch
Category
Control type
Lift capacity (at ends) 1,620 kg (3,570 lbs)
PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type
Pump flow 12.9 gpm (48.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*