John Deere 1450

John Deere 1450The John Deere 1450 is a 2WD or 4WD utility tractor manufactured by Yanmar for distributor John Deere in Japan from 1984 to 1988. The John Deere 1450 is equipped with a 3.1 L (190.3 cu·in) four-cylinder diesel engine and a sliding gear transmission with 9 forward and 3 reverse gears.

The JD 1450 utility tractor used the Yanmar engine. It is a 3.1 L, 3,118 cm2, (190.3 cu·in) four-cylinder natural aspirated diesel engine with 95.0 mm (3.74 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 18.0:1. This engine produced 55.8 PS (41.0 kW; 55.0 HP) at 2,400 rpm of output power.

The John Deere 1450 is equipped with power assist steering, differential hydraulic wet disc brakes, an open operator station with ROPS, and 80.0 liters (21.1 US gal.; 17.6 Imp. gal) fuel tank.

John Deere 1450 Specifications

General Specifications
ModelJohn Deere 1450
Length
Width
Height
Wheel base2,100 mm (82.7 in)
Weight (shipping) 2WD: 2,000 kg (4,409 lbs)
4WD: 2,300 kg (5,071 lbs)
Fuel tank capacity80.0 liters (21.1 US gal.; 17.6 Imp. gal)
Battery12V
Cabin typeOpen operator station with ROPS
Engine
Engine modelYanmar
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement3.1 L, 3,118 cm2, (190.3 cu·in)
Bore and stroke95.0 mm X 110.0 mm (3.74 in X 4.33 in)
Compression ratio18.0:1
Horsepower55.8 PS (41.0 kW; 55.0 HP) at 2,400 rpm
StarterElectric
Oil capacity:12.0 L (12.7 US. qt, 10.6 Imp. qt.)
Coolant capacity:10.5 L (11.1 US. qt, 9.2 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower assist
BrakesDifferential hydraulic wet disc
Final drivePlanetary
Differential lockMechanical
Transmission model
Transmission typeSliding gear
Gears9 forward and 3 reverse
Speed Forward: 25.7 kmh (16 mph) Reverse: kmh (0 mph)
Tires
Front tires Ag: 6.50-16
Rear tires Ag: 14.9-28
Three-Point Hitch
CategoryII/I
Control typeCenter link sensing with position and draft contro
Lift capacity (at ends)1,200 kg (2650 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Valves0 to 2
Total flow10.7 gpm (40.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*