The John Deere 2040 is a 2WD or 4WD utility tractor from the 2040 series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1976 to 1982. This second generation was manufactured from 1980 to 1982. The JD 2040 is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and a partially synchronized transmission with 8 forward and 4 reverse gears.
The John Deere 2040 utility tractor used the John Deere engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.7:1. This engine produced 40.5 PS (29.8 kW; 40.0 HP) at 2,500 rpm of output power.
The JD 2040 is equipped with power assist steering, hydraulic wet disc brakes, two-post Roll-Gard ROPS, and 62.5 liters (16.5 US gal.; 13.7 Imp. gal) fuel tank. This tractor could be equipped with the John Deere 175 loader.
John Deere 2040 Specifications
| General Specifications | |
| Model | John Deere 2040 |
| Length | 3,330 mm (131.1 in) |
| Width | 2,270 mm (89.4 in) |
| Height (hood) | 1,330 mm (52.4 in) |
| Wheel base |
2WD: 1,880 mm (74 in) 4WD: 2,050 mm (80.7 in) |
| Ground clearance | 330 mm (13 in) |
| Weight |
2WD: 2,180 kg (4,806 lbs) 4WD: 2,620 kg (5,776 lbs) |
| Fuel tank capacity | 62.5 liters (16.5 US gal.; 13.7 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post Roll-Gard ROPS |
| Engine | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.9 L, 2,933 cm2, (179.0 cu·in) |
| Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
| Compression ratio | 16.7:1 |
| Horsepower | 40.5 PS (29.8 kW; 40.0 HP) at 2,500 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power assist |
| Brakes | Hydraulic wet disc |
| Final drive | Planetary |
| Differential lock | Mechanical rear |
| Transmission model | Top-Shaft Synchronized (TSS) |
| Transmission type | Partially synchronized |
| Gears | 8 forward and 4 reverse |
| Speed | Forward: 26.3 kmh (16.3 mph) Reverse: 11.8 kmh (7.3 mph) |
| Tires | |
| Front tires | Ag: 6.00-16 (2WD), 9.5-24 (4WD) |
| Rear tires | Ag: 13.6-28 (2WD), 16.9-28 (4WD) |
| Three-Point Hitch | |
| Category | II |
| Control type | Position control and lower-link draft sensing |
| Lift capacity (at 610 mm / 24 in) | 1,088 kg (2,400 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center |
| Pressure | 2,250 psi (155.1 bar) |
| Valves | 1 |
| Pump flow | 13.0 gpm (49.2 lpm) |
Be the first to comment