John Deere 4110

John Deere 4110The John Deere 4110 is a 4WD compact utility tractor from the 4000 Ten Compact series. This tractor was manufactured by Yanmar for John Deere in Japan from 2002 to 2006. The John Deere 4110 is equipped with a 1.0 L three-cylinder diesel engine and one of two transmissions: sliding gear transmission with 8 forward and 4 reverse gears or hydrostatic transmission with infinite (2-range) forward and reverse gears.

The JD 4110 compact utility tractor used the Yanmar 3TNE74 engine. It is a 1.0 L, 999 cm2, (61.0 cu·in) three-cylinder natural aspirated diesel engine with 74.0 mm (2.91 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. This engine produced 20.3 PS (14.9 kW; 20.0 HP) at 2650 rpm of maximum output power.

The John Deere 4110 is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 22.0 liters (5.8 US gal.; 4.8 Imp. gal) fuel tank.

Following attachments are available for the John Deere 4110 compact utility tractor:

  • Mid-mount John Deere 54 in (1,370 mm) mower deck with 3-blades
  • Mid-mount John Deere 60 in (1,520 mm) mower deck with 3-blades
  • John Deere 410 loader

John Deere 4110 Specifications

General Specifications
Model John Deere 4110
Length 2,610 mm (102.8 in)
Width 1,190 mm (46.9 in)
Height 2,000 mm (78.7 in)
Wheel base 1,470 mm (57.9 in)
Weight Gear: 688 kg (1,517 lbs)
Hydro: 720 kg (1,580 lbs)
Fuel tank capacity 22.0 liters (5.8 US gal.; 4.8 Imp. gal)
Battery 12V, CCA 435A
Cabin type Open operator station with two-post ROPS
Engine
Engine model Yanmar 3TNE74
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.0 L, 999 cm2, (61.0 cu·in)
Bore and stroke 74.0 mm X 78.0 mm (2.91 in X 3.07 in)
Horsepower 20.3 PS (14.9 kW; 20.0 HP) at 2650 rpm
Starter Electric
Oil capacity: 2.2 L (2.3 US. qt, 1.9 Imp. qt.)
Coolant capacity: 2.4 L (2.5 US. qt, 2.1 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model
Transmission type Sliding gear / Collar shift
Gears 8 forward and 4 reverse
Speed Forward: 18.0 kmh (11.2 mph) Reverse: 9.3 (5.8 mph)
Transmission oil capacity 13.6 L (3.6 US. gal, 3 Imp. gal.)
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 19.3 kmh (12 mph) Reverse: 9.7 (6 mph)
Transmission oil capacity 13.2 L (3.5 US. gal, 2.9 Imp. gal.)
Tires
Front tires Ag: 5.00-12
Rear tires Ag: 9.5-16
Three-Point Hitch
Caterogy I
Control type
Lift capacity (at ends) 520 kg (1,150 lbs)
PTO (Power take-off shaft)
Middle PTO type Independent
Middle PTO speed 2,100 rpm
Rear PTO type Transmission (gear) or independent (hydro)
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 5
Pump flow 5.1 gpm (19.3 lpm)