John Deere 5085M (2008-2011)

John Deere 5085M (2008-2011)The John Deere 5085M is a 2WD or 4WD utility tractor from the 5M series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2008 to 2018. This first generation was manufactured from 2008 to 2011. The JD 5085M is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and one of four transmissions: a partially synchronized transmission with 16 forward and 16 reverse gears, a partially synchronized transmission with 12 forward and 4 reverse gears, a partially synchronized with power shuttle transmission with 16 forward and 16 reverse gears or partially synchronized with power shuttle transmission with 32 forward and 16 reverse gears.

The JD 5085M utility tractor used the John Deere PowerTech M 4045 engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 86.2 PS (63.4 kW; 85 HP) at 2,200 rpm of output power.

The John Deere 5085M is equipped with hydrostatic power steering, hydraulic wet disc brakes, foldable ROPS, deluxe ROPS or Cab (optional) and 114.7 liters (30.3 US gal.; 25.2 Imp. gal) fuel tank for the ROPS version or 154.0 liters (40.7 US gal.; 33.9 Imp. gal) for the cab version.

Following attachments are available for the John Deere 5085M utility tractor:

  • John Deere 553 loader
  • John Deere 563 loader

John Deere 5085M Specifications

General Specifications
Model John Deere 5085M
Length
Width
Height
Wheel base
Ground clearance (front axle) 470 mm (18.5 in)
Weight (operating) 2WD ROPS: 2,900 kg (6,400 lbs)
2WD Deluxe ROPS: 3,107 kg (6,850 lbs)
2WD Cab: 3,450 kg (7,600 lbs)
4WD ROPS: 3,100 kg (6,800 lbs)
4WD Deluxe ROPS: 3,300 kg (7,250 lbs)
4WD Cab: 3,630 kg (8,000 lbs)
Fuel tank capacity ROPS: 114.7 liters (30.3 US gal.; 25.2 Imp. gal)
Cab: 154.0 liters (40.7 US gal.; 33.9 Imp. gal)
Battery 12V, CCA 925A
Cabin type Foldable ROPS, deluxe ROPS or Cab (optional)
Engine
Engine model John Deere PowerTech M 4045
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.5 L, 4,523 cm2, (276.0 cu·in)
Bore and stroke 106.0 mm X 127.0 mm (4.17 in X 5 in)
Horsepower 86.2 PS (63.4 kW; 85 HP) at 2,200 rpm
Torque 448.8 N·m (45.8 kg·m, 330.8 ft·lb) at 1,600 rpm
Starter Electric
Oil capacity: 8.3 L (8.8 US. qt, 7.3 Imp. qt.)
Coolant capacity: 11.4 L (12 US. qt, 10 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD (optional)
Steering type Hydrostatic power
Brakes Hydraulic wet disc
Final drive Inboard planetary
Differential lock Shift-on-the-move electro-hydraulic rear differential lock
Transmission model SyncReverser
Transmission type Partially synchronized
Gears 16 forward and 16 reverse
Speed Forward: 31.5 kmh (19.6 mph) Reverse: 35.0 kmh (21.8 mph)
Transmission model SyncShuttle Plus
Transmission type Partially synchronized
Gears 12 forward and 4 reverse
Speed Forward: 29.0 kmh (18 mph) Reverse: 19.3 kmh (12 mph)
Transmission model PowrReverser
Transmission type Partially synchronized with power shuttle
Gears 16 forward and 16 reverse
Speed Forward: 31.5 kmh (19.6 mph) Reverse: 35.0 kmh (21.8 mph)
Transmission model PowrReverser Plus
Transmission type Partially synchronized with power shuttle
Gears 32 forward and 16 reverse
Tires
Front tires Ag: 7.5-16 (2WD), 11.2-24 (4WD)
Rear tires Ag: 16.9-30
Three-Point Hitch
Category II/I
Control type
Lift capacity (at 610 mm/24 in) 1,630 kg (3,595 lbs)
2,040 kg (4,500 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with electro-hydraulic clutch
Rear PTO speed 540/540E or 540/540E/1000 (optional)
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 45.0 L (11.9 US. gal, 9.9 Imp. gal.)
Pressure 2828 psi (195 bar)
Valves Rear: 0, 2 or 3
Middle: 0, 2 or 3
Pump flow 18.4 gpm (69.7 lpm)
Steering flow 6.3 gpm (23.8 lpm)
Total flow 24.7 gpm (93.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*