John Deere 510

John Deere 510The John Deere 510 is a 2WD backhoe loader tractor manufactured by John Deere from 1971 to 1983. The John Deere 510 is equipped with a 4.4 L (270.0 cu·in) four-cylinder diesel engine and a full power shift transmission with 8 forward and 4 reverse gears.

The JD 510 backhoe loader tractor used the John Deere diesel engine. It is a 4.4 L, 4,425 cm2, (270.0 cu·in) four-cylinder natural aspirated diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 17.3:1. This engine produced 84.2 PS (61.9 kW; 83.0 HP) at 2,500 rpm of output power.

The John Deere 510 is equipped with power steering, hydraulic wet disc brakes, an open operator station (four-post ROPS/FOPS and cab available), and 128.7 liters (34 US gal.; 28.3 Imp. gal) fuel tank.

Following attachments are available for the John Deere 510 backhoe loader tractor:

  • John Deere loader
  • John Deere backhoe

John Deere 510 Specifications

General Specifications
Model John Deere 510
Length 7,490 mm (294.9 in)
Width 2,130 mm (83.9 in)
Height (exhaust) 2,640 mm (103.9 in)
Wheel base
Weight 8,693 kg (19,165 lbs)
Fuel tank capacity 128.7 liters (34 US gal.; 28.3 Imp. gal)
Battery Two 6V, 340Ah
Cabin type Open operator station. Four-post ROPS/FOPS and cab available.
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.4 L, 4,425 cm2, (270.0 cu·in)
Bore and stroke 108.0 mm X 121.0 mm (4.25 in X 4.76 in)
Compression ratio 17.3:1
Horsepower 84.2 PS (61.9 kW; 83.0 HP) at 2,500 rpm
Torque 274 N·m (27.9 kg·m, 201.9 ft·lb) at 1,300 rpm
Starter Electric
Oil capacity: 7.6 L (8 US. qt, 6.7 Imp. qt.)
Coolant capacity: 18.0 L (19 US. qt, 15.8 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes Hydraulic wet disc
Final drive Inboard planetary
Differential lock Mechanical rear
Transmission model PowerShift
Transmission type Full power shift
Gears 8 forward and 4 reverse
Speed Forward: 29.0 kmh (18 mph) Reverse: 9.2 kmh (5.7 mph)
Front tires Industrial: 14.5/75-16.1
Rear tires Industrial: 18.4-28
Hydraulic system
Hydraulic type Closed center
Hydraulic capacity 113.2 L (29.9 US. gal, 24.9 Imp. gal.)
Pressure 2350 psi (162 bar)
Pump flow 60.0 gpm (227.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

1 Comment

Leave a Reply

Your email address will not be published.