The John Deere 6110M is a 2WD/4WD utility tractor from the 6M series. This tractor has been manufactured by John Deere in Mannheim, Baden-Württemberg, Germany since 2015. This second generation has been manufactured since 2020. The John Deere 6110M is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and one of five transmission variants.
The JD 6110M utility tractor used the John Deere 4045HL290 engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 111.5 PS (82.0 kW; 110.0 HP) at 2,100 rpm of output power.
The John Deere 6110M is equipped with power steering, hydraulic wet disc brakes, Cab (standard) and 174.9 liters (46.2 US gal.; 38.5 Imp. gal) fuel tank.
Following attachments are available for the John Deere 6110M utility tractor:
- John Deere 600R loader
- John Deere 600R MSL loader
- John Deere 620R loader
- John Deere 620R MSL loader
John Deere 6110M Specifications
| General Specifications | |
| Model | John Deere 6110M |
| Length | 4,360 mm (171.7 in) |
| Width | – |
| Height (cab) | 2,790 mm (109.8 in) |
| Wheel base | 2,400 mm (94.5 in) |
| Ground clearance (front axle) | 360 mm (14.2 in) |
| Weight | 5,679 kg (12,520 lbs) |
| Fuel tank capacity | 174.9 liters (46.2 US gal.; 38.5 Imp. gal) |
| Battery | 12V, 154Ah or 174Ah (optional) |
| Cabin type | Cab (standard) |
| Engine | |
| Engine model | John Deere 4045HL290 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.5 L, 4,523 cm2, (276.0 cu·in) |
| Bore and stroke | 105.0 mm X 127.0 mm (4.13 in X 5 in) |
| Horsepower | 111.5 PS (82.0 kW; 110.0 HP) at 2,100 rpm |
| Torque | 515.0 N·m (52.5 kg·m, 379.6 ft·lb) at 1,600 rpm |
| Starter | Electric |
| Oil capacity: | 17.0 L (18 US. qt, 15 Imp. qt.) |
| Coolant capacity: | 20.0 L (21.1 US. qt, 17.6 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Hydraulic wet disc |
| Final drive | Planetary |
| Differential lock | Electro-hydraulic |
| Transmission model | PowrQuad |
| Transmission type | Four-speed power shift |
| Gears | 16 forward and 16 reverse |
| Speed | Forward: 35.7 kmh (22.2 mph) Reverse: 37.0 kmh (23 mph) |
| Transmission model | PowrQuad/AutoQuad |
| Transmission type | Four-speed power shift |
| Gears | 24 forward and 24 reverse |
| Speed | Forward: 40.2 kmh (25 mph) Reverse: 41.8 kmh (26 mph) |
| Transmission model | CommandQuad |
| Transmission type | Four-speed power shift |
| Gears | 24 forward and 24 reverse |
| Speed | Forward: 39.3 kmh (24.4 mph) Reverse: 41.0 kmh (25.5 mph) |
| Transmission model | AutoPowr |
| Transmission type | Infinitely variable transmission (IVT) |
| Gears | Infinite forward and reverse |
| Tires | |
| Front tires | Ag: 540/65R24 |
| Rear tires | Ag: 600/65R38 |
| Three-Point Hitch | |
| Category | II/IIIN |
| Control type | Electronic lower link draft sensing |
| Lift capacity |
3749 kg (8267 lbs) Optional: 5000 kg (11023 lbs) |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent with electro-hydraulic wet disc clutch (optional) |
| Front PTO speed | 1000 rpm |
| Rear PTO type | Independent with electro-hydraulic wet disc clutch |
| Rear PTO speed | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center or closed center PFC |
| Valves |
Rear: 2 to 4 Front: 0 to 3 |
| Pump flow |
Open center: 21.2 gpm (80.3 lpm) Closed center: 30.0 gpm (113.6 lpm) |
Be the first to comment