John Deere 8010

John Deere 8010The John Deere 8010 is a four-wheel drive tractor manufactured by John Deere in Waterloo, Iowa, USA during 1960. The John Deere 8010 is equipped with a 7.0 L (425.0 cu·in) six-cylinder diesel engine and a gear type transmission with 9 forward and 2 reverse gears.

The JD 8010 four-wheel drive used the Detroit Diesel 671E engine. It is a 7.0 L, 6,964 cm2, (425.0 cu·in) six-cylinder natural aspirated diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 218.0 PS (160.3 kW; 215.0 HP) at 2,100 rpm of output power.

The John Deere 8010 is equipped with articulated power steering, pneumatic drum brakes, an open operator station and 401.2 liters (106 US gal.; 88.3 Imp. gal) fuel tank.

John Deere 8010 Specifications

General Specifications
ModelJohn Deere 8010
Length6,040 mm (237.8 in)
Width2,430 mm (95.7 in)
Height (steering wheel)2,510 mm (98.8 in)
Wheel base3,040 mm (119.7 in)
Weight8,935 kg (19,698 lbs)
Fuel tank capacity401.2 liters (106.0 US gal.; 88.3 Imp. gal)
Cabin typeOpen operator station
Engine modelDetroit Diesel 671E
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement7.0 L, 6,964 cm2, (425.0 cu·in)
Bore and stroke108.0 mm X 127.0 mm (4.25 in X 5 in)
Compression ratio17.0:1
Horsepower218.0 PS (160.3 kW; 215.0 HP) at 2,100 rpm
Oil capacity:17.0 L (18 US. qt, 15 Imp. qt.)
Coolant capacity:45.4 L (48 US. qt, 39.9 Imp. qt.)
Transmission and chassis
Chassis4×4 articulated 4WD
Steering typeArticulated power
BrakesPneumatic drum
Transmission model
Transmission typeGear type
Gears9 forward and 2 reverse
Speed Forward: 29.0 kmh (18 mph) Reverse: 9.1 kmh (5.7 mph)
Front tires Ag: 23.1-26
Industrial: 18.00×25
Rear tires Ag: 23.1-26
Industrial: 18.00×25
Hydraulic system
Hydraulic type
Hydraulic capacity94.6 L (25 US. gal, 20.8 Imp. gal.)
Pump flow 40.0 gpm (151.4 lpm)
60.0 gpm (227.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.