John Deere X130R

John Deere X130RThe John Deere X130R is a 2WD rear-discharge mower from the X100 series. This tractor was manufactured by John Deere in Greeneville, Tennessee, USA during 2010. The John Deere X130R is equipped with a 0.7 L (40.0 cu·in) two-cylinder gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The John Deere X130R rear-discharge mower used the Briggs & Stratton Model 4055 engine. It is a 0.7 L, 656 cm2, (40.0 cu·in) two-cylinder natural aspirated gasoline engine with 75.0 mm (2.95 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. This engine produced 17 PS (12.5 kW; 16.8 HP) at 3,150 rpm of output power.

The John Deere X130R is equipped with manual steering, open operator station, 7.6 liters (2 US gal.; 1.7 Imp. gal) fuel tank, and mid-mount the John Deere 42C – 42 in (1,060 mm) mower deck with 2-blades and a manual lift.

John Deere X130R Specifications

General Specifications
Model John Deere X130R
Length 2,515 mm (99 in)
Width 1,110 mm (43.7 in)
Height 1,120 mm (44.1 in)
Wheel base
Weight 208 kg (459 lbs)
Fuel tank capacity 7.6 liters (2 US gal.; 1.7 Imp. gal)
Battery 12V Type BCI Group U1
Cabin type Open operator station
Engine
Engine model Briggs & Stratton Model 4055
Engine type Four-stroke, air-cooled, V-twin
Cylinders 2
Fuel type Gasoline
Displacement 0.7 L, 656 cm2, (40.0 cu·in)
Bore and stroke 75.0 mm X 73.0 mm (2.95 in X 2.87 in)
Horsepower 17 PS (12.5 kW; 16.8 HP) at 3,150 rpm
Starter Electric
Oil type SAE 10W-30, 10W-40
Oil capacity: 1.9 L (2 US. qt, 1.7 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes
Transmission model Tuff Torq K46CY
Transmission type Belt-driven hydrostatic
Gears Infinite forward and reverse
Speed Forward: 8.4 kmh (5.2 mph) Reverse: 4.8 (3 mph)
Tires
Front tires Lawn/turf: 15×6.00-6
Rear tires Lawn/turf: 18×8.5-8
PTO (Power take-off shaft)
Middle PTO type Independent with electric clutch
Middle PTO speed