John Deere X135R

John Deere X135RThe John Deere X135R is a 2WD rear-discharge mower from the X100 series. This tractor has been manufactured by John Deere in Greeneville, Tennessee, USA since 2013. The John Deere X135R is equipped with a 0.7 L (40.0 cu·in) two-cylinder gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The John Deere X135R rear-discharge mower used the Briggs & Stratton Model 40 engine. It is a 0.7 L, 656 cm2, (40.0 cu·in) two-cylinder natural aspirated gasoline engine with 75.0 mm (2.95 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. This engine produced 12 PS (8.8 kW; 11.8 HP) at 3,150 rpm of output power.

The John Deere X135R is equipped with manual steering, open operator station, 7.6 liters (2 US gal.; 1.7 Imp. gal) fuel tank, and mid-mount the John Deere 42 in (1,060 mm) mower deck with a manual lift.

John Deere X135R Specifications

General Specifications
ModelJohn Deere X135R
Length2,475 mm (97.4 in)
Width960 mm (37.8 in)
Height1,080 mm (42.5 in)
Wheel base
Weight240 kg (529 lbs)
Fuel tank capacity7.6 liters (2 US gal.; 1.7 Imp. gal)
Battery12V Type BCI Group U1
Cabin typeOpen operator station
Engine
Engine modelBriggs & Stratton Model 40
Engine typeFour-stroke, air-cooled, V-twin
Cylinders2
Fuel typeGasoline
Displacement0.7 L, 656 cm2, (40.0 cu·in)
Bore and stroke75.0 mm X 73.0 mm (2.95 in X 2.87 in)
Horsepower12 PS (8.8 kW; 11.8 HP) at 3,150 rpm
StarterElectric
Oil typeSAE 10W-30, 10W-40
Oil capacity:1.9 L (2 US. qt, 1.7 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typeManual
Brakes
Transmission modelTuff Torq K46CY
Transmission typeBelt-driven hydrostatic
GearsInfinite forward and reverse
Speed Forward: 8.4 kmh (5.2 mph) Reverse: 4.8 (3 mph)
Tires
Front tiresLawn/turf: 15×6.00-6
Rear tiresLawn/turf: 18×8.5-8
PTO (Power take-off shaft)
Middle PTO typeIndependent with electric clutch
Middle PTO speed
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*