John Deere X595

John Deere X595The John Deere X595 is a 4WD lawn and garden tractor from the HDGT X series. This tractor was manufactured by the John Deere in Horicon, Wisconsin, USA from 2002 to 2006.

The John Deere X595 is equipped with one of two engines: a 1.0 L three-cylinder diesel engine or a 1.1 L three-cylinder diesel engine and shaft-driven hydrostatic transmission with infinite forward and reverse gears.

The JD X595 is equipped with hydrostatic power steering, mechanical wet disc brakes, open operator station and 24.6 liters (6.5 US gal.; 5.4 Imp. gal) fuel tank.

The tractor could be equipped with the following engines:

  • Yanmar 3TNE74. It is a 1 L, 1,006 cm2, (61.4 cu·in) three-cylinder natural aspirated diesel engine with 74.0 mm (2.91 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. The compression ratio rating is 23.0:1. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 3,475 rpm of horsepower.
  • Yanmar 3TNV76. It is a 1.1 L, 1,116 cm2, (68.1 cu·in) three-cylinder natural aspirated diesel engine. The cylinder bore is 76.0 mm (2.99 in) and the piston stroke is 82.0 mm (3.22 in). The compression ratio rating is 23.4:1. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 3,425 rpm of output power.

Following attachments are available for the JD X595 garden tractor:

  • Mid-mount John Deere 48C 48 in (1,210 mm) mower deck with 3-blades and hydraulic lift
  • Mid-mount John Deere 54C 54 in (1,370 mm) mower deck with 3-blades and hydraulic lift
  • Mid-mount John Deere 62C 62 in (1,570 mm) mower deck with 3-blades and hydraulic lift
  • John Deere 45 loader

John Deere X595 Specifications

General Specifications
Model John Deere X595
Length 2,000 mm (78.7 in)
Width 1,180 mm (46.5 in)
Height 1,270 mm (50 in)
Wheel base 1,410 mm (55.5 in)
Weight 489 kg (1,078 lbs)
Fuel tank capacity 24.6 liters (6.5 US gal.; 5.4 Imp. gal)
Battery 12V, CCA 500A
Cabin type Open operator station
Engine
Engine model Yanmar 3TNE74
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.0 L, 1,006 cm2, (61.4 cu·in)
Bore and stroke 74.0 mm X 78.0 mm (2.91 in X 3.07 in)
Compression ratio 23.0:1
Horsepower 24.3 PS (17.9 kW; 24.0 HP) at 3,475 rpm
Starter Electric
Oil type SAE 10W-30
Oil capacity: 2.8 L (3 US. qt, 2.5 Imp. qt.)
Coolant capacity: 2.8 L (3 US. qt, 2.5 Imp. qt.)
Engine
Engine model Yanmar 3TNV76
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.1 L, 1116 cm2, (68.1 cu·in)
Bore and stroke 76.0 mm X 82.0 mm (2.99 in X 3.22 in)
Compression ratio 23.4:1
Horsepower 24.3 PS (17.9 kW; 24.0 HP) at 3,425 rpm
Starter Electric
Oil type SAE 10W-30
Oil capacity: 2.1 L (2.2 US. qt, 1.8 Imp. qt.)
Coolant capacity: 2.8 L (3 US. qt, 2.5 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Mechanical wet disc
Transmission model Tuff Torq K92
Transmission type Shaft-driven hydrostatic
Gears Infinite forward and reverse
Speed Forward: 13.7 kmh (8.5 mph) Reverse: 8.0 (5 mph)
Transmission oil capacity 6.6 L (1.7 US. gal, 1.5 Imp. gal.)
Tires
Front tires Lawn/turf: 18×8.5-10
Rear tires Lawn/turf: 26×12-12
Three-Point Hitch
Caterogy 0 (optional)
I Limited (optional)
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Front PTO type Optional
Front PTO spped 2,000 rpm
Rear PTO type Optional
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type
Pressure 2,000 psi (138 bar)
Valves 2
Total flow 6.2 gpm (23.5 lpm)