Kioti DK45

Kioti DK45The Kioti DK45 is a 4WD compact utility tractor, manufactured by Kioti (a part of Daedong) in Daegu, South Korea from 2000 to 2007. The Kioti DK45 is equipped with a 2.2 L (134.1 cu·in) four-cylinder diesel engine and a synchronized shuttle transmission with 12 forward and 12 reverse gears.

The Kioti DK45 compact utility tractor used the Daedong 4A220 engine. It is a 2.2 L, 2,197 cm2, (134.1 cu·in) four-cylinder natural aspirated diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 92.4 mm (3.64 in) of the piston stroke. The compression ratio rating is 22.0:1. This engine produced 45.7 PS (33.6 kW; 45.1 HP) at 2,600 rpm of gross output power.

The Kioti DK45 is equipped with hydraulic power steering, wet disc brakes, foldable ROPS, and 40.0 liters (10.6 US gal.; 8.8 Imp. gal) fuel tank.

Kioti DK45 Specifications

General Specifications
ModelKioti DK45
Length3,400 mm (133.9 in)
Width1,750 mm (68.9 in)
Height2,440 mm (96.1 in)
Wheel base1,870 mm (73.6 in)
Ground clearance40 mm (1.6 in)
Weight1,720 kg (3,792 lbs)
Fuel tank capacity DK45: 40.0 liters (10.6 US gal.; 8.8 Imp. gal)
DK45S: 58.0 liters (15.3 US gal.; 12.8 Imp. gal)
Battery12V
Cabin typeFoldable ROPS
Engine
Engine modelDaedong 4A220
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement2.2 L, 2,197 cm2, (134.1 cu·in)
Bore and stroke87.0 mm X 92.4 mm (3.43 in X 3.64 in)
Compression ratio22.0:1
Horsepower45.7 PS (33.6 kW; 45.1 HP) at 2,600 rpm
StarterElectric
Oil typeSAE 15W-40
Oil capacity:7.0 L (7.4 US. qt, 6.2 Imp. qt.)
Coolant capacity:8.9 L (9.4 US. qt, 7.8 Imp. qt.)
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydraulic power
BrakesWet disc
Differential lockBevel gear
Transmission model
Transmission typeSynchronized shuttle
Gears12 forward and 12 reverse
Speed Forward: 24.6 kmh (15.3 mph)
Transmission oil capacity34.0 L (9 US. gal, 7.5 Imp. gal.)
Tires
Front tires Ag: 9.5-16
Lawn/turf: 29×12.5-15
Rear tires Ag: 14.9-24
Lawn/turf: 21.5L-16.1
Three-Point Hitch
CategoryI
Control typePosition, draft and mixed control
Lift capacity (at ends)1,800 kg (3,970 lbs)
PTO (Power take-off shaft)
Middle PTO typeOptional
Middle PTO speed2,000 rpm
Rear PTO typeIndependent
Rear PTO speed540 rpm
Hydraulic system
Hydraulic type
Pump flow8.2 gpm (31 lpm)
Steering flow4.9 gpm (18.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*