The Kubota A-17 is a 4WD sub-compact utility tractor from the Aste series. This tractor was manufactured by the Kubota from 1988 to 1992. The Kubota A-17 is equipped with 1.0 L three-cylinder diesel engine and transmission with 6 forward and 2 reverse gears.
The Kubota A-17 utility tractor used the Kubota D1005 engine. It is a 1 L, 1,001 cm2, (61.1 cu·in) three-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 74.0 mm (2.91 in) of the piston stroke. This engine produced 17 PS (12.5 kW; 16.8 HP) at 2,600 rpm of maximum output power.
The Kubota A-17 is equipped with an open operator station and two-post ROPS, 17.0 liters (4.5 US gal.; 3.7 Imp. gal) fuel tank.
Kubota A-17 Specifications
|Length||2,530 mm (99.6 in)|
|Width||1,040 mm (40.9 in)|
|Height||1,250 mm (49.2 in)|
|Wheel base||1,350 mm (53.1 in)|
|Weight||660 kg (1455 lbs)|
|Fuel tank capacity||17.0 liters (4.5 US gal.; 3.7 Imp. gal)|
|Cabin type||Open operator station with two-post ROPS|
|Engine model||Kubota D1005|
|Engine type||Four-stroke, water-cooled, inline|
|Displacement||1.0 L, 1,001 cm2, (61.1 cu·in)|
|Bore and stroke||76.0 mm X 74.0 mm (2.99 in X 2.91 in)|
|Horsepower||17 PS (12.5 kW; 16.8 HP) at 2,600 rpm|
|Transmission and chassis|
|Gears||6 forward and 2 reverse|
|Speed||Forward: 12.9 kmh (8 mph) Reverse: 6.0 (3.7 mph)|
|Front tires||Ag: 6-12|
|Rear tires||Ag: 8-18|
|PTO (Power take-off shaft)|
|Rear PTO type||–|
|Rear PTO spped||540 rpm|
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment