Kubota B1610

Kubota B1610The Kubota B1610 is a 4WD sub-compact utility tractor from the B series. This tractor was manufactured by the Kubota. The Kubota B1610 is equipped with a 0.7 L three-cylinder diesel engine and transmission with 6 forward and 2 reverse gears.

The Kubota B1610 utility tractor used the Kubota D722 engine. It is a 0.7 L, 719 cm2, (43.9 cu·in) three-cylinder natural aspirated diesel engine with 67.0 mm (2.64 in) of the cylinder bore and 68.6 mm (2.7 in) of the piston stroke. This engine produced 15.9 PS (11.7 kW; 15.7 HP) at rpm of maximum output power.

The Kubota B1610 is equipped with wet disc type brakes, open operator station with two-post ROPS and 12.9 liters (3.4 US gal.; 2.8 Imp. gal) fuel tank.

Kubota B1610 Specifications

General Specifications
Model Kubota B1610
Length 2,030 mm (79.9 in)
Width 920 mm (36.2 in)
Height 1,250 mm (49.2 in)
Wheel base 1,270 mm (50 in)
Weight 522 kg (1150 lbs)
Fuel tank capacity 12.9 liters (3.4 US gal.; 2.8 Imp. gal)
Battery 12V
Cabin type Open operator station with two-post ROPS
Engine
Engine model Kubota D722
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 0.7 L, 719 cm2, (43.9 cu·in)
Bore and stroke 67.0 mm X 68.6 mm (2.64 in X 2.7 in)
Horsepower 15.9 PS (11.7 kW; 15.7 HP)
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type
Brakes Wet disc type
Transmission model
Transmission type
Gears 6 forward and 2 reverse
Tires
Front tires Ag: 5-12 Lawn/turf: 20×8.00-10
Rear tires Ag: 8-16 Lawn/turf: 212/80D-15
Three-Point Hitch
Caterogy I
Control type
Lift capacity 540 kg (1,190 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO spped 2,545 rpm
Rear PTO type
Rear PTO spped 540/1,000 rpm