The Kubota B1620D is a 4WD compact utility tractor from the B20 series. The Kubota B1620 is equipped with a 0.7 L three-cylinder diesel engine and gear shift transmission with dry single-plate type clutch (6 forward and 2 reverse gears).
The Kubota B1620D utility tractor used the Kubota D722-D25 engine. It is a 0.7 L, 719 cm2, (43.9 cu·in) three-cylinder natural aspirated diesel engine with 67.0 mm (2.64 in) of the cylinder bore and 68.0 mm (2.68 in) of the piston stroke. This engine produced 16 PS (11.8 kW; 15.8 HP) at 2,800 rpm of gross output power and 12.5 PS (9.2 KW; 12.3 HP).
The Kubota B1620 is equipped with manual steering, wet disc type brakes, open operator station with two-post ROPS and 14.0 liters (3.7 US gal.; 3.1 Imp. gal) fuel tank.
Kubota B1620 Specifications
| General Specifications | |
| Model | Kubota B1620D |
| Length | 2,360 mm (92.9 in) |
| Width | 932 mm (36.7 in) |
| Height | 1,235 mm (48.6 in) |
| Wheel base | 1,270 mm (50 in) |
| Weight | 510 kg (1124.4 lbs) |
| Fuel tank capacity | 14.0 liters (3.7 US gal.; 3.1 Imp. gal) |
| Battery | 12V CCA: 400A |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Kubota D722-D25 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 0.7 L, 719 cm2, (43.9 cu·in) |
| Bore and stroke | 67.0 mm X 68.0 mm (2.64 in X 2.68 in) |
| Horsepower | 16 PS (11.8 kW; 15.8 HP) at 2,800 rpm |
| Torque | 40.5 N·m (4.1 kg·m, 29.8 ft·lb) |
| Starter | Electric |
| Oil capacity: | 2.4 L (2.54 US. qt, 2.11 Imp. qt.) |
| Coolant capacity: | 3.4 L (3.59 US. qt, 2.99 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Manual |
| Brakes | Wet disc type |
| Transmission model | – |
| Transmission type | Gear shift with dry single plate type clutch |
| Gears | 6 forward and 2 reverse |
| Speed | Forward: 16.9 kmh (10.5 mph) Reverse: 6.9 (4.3 mph) |
| Transmission oil capacity | 10.5 L (11.1 US. qt, 9.24 Imp. qt.) |
| Tires | |
| Front tires | Ag: 4.5-10 |
| Rear tires | Ag: 7-16 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | Up and down type control valve |
| Lift capacity | 540 kg (1,190 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | – |
| Middle PTO spped | 2,500 rpm |
| Rear PTO type | – |
| Rear PTO spped | 540/1,000 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Hydraulic capacity | 10.5 L (11.1 US. qt, 9.24 Imp. qt.) |
| Pump flow | 3.72 gpm (14.1 lpm) |
Be the first to comment