Kubota B1710

Kubota B1710The Kubota B1710 is a 4WD compact utility tractor manufactured by the Kubota from 2000 to 2005. The Kubota B1710 is equipped with a 0.9 L three-cylinder diesel engine and gear shift transmission (6 forward and 2 reverse gears) with dry single-plate type clutch.

The Kubota B1710 utility tractor used the D905-D18 engine. It is a 0.9 L, 898 cm2, (54.8 cu·in) three-cylinder natural aspirated diesel engine with 72.0 mm (2.83 in) of the cylinder bore and 73.6 mm (2.9 in) of the piston stroke. This engine produced 18.2 PS (13.4 kW; 18 HP) at rpm of maximum horsepower and 14.3 PS (10.5 KW; 14.1 HP) of PTO power.

The Kubota B1710 is equipped with integral type power steering, wet disc type brakes, open operator station with two-post ROPS and 24.0 liters (6.3 US gal.; 5.3 Imp. gal) fuel tank.

Kubota B1710 Specifications

General Specifications
Model Kubota B1710
Length 2,378 mm (93.6 in)
Width 990 mm (39 in)
Height 2,250 mm (88.6 in)
Wheel base 1,500 mm (59.1 in)
Weight 660 kg (1,455 lbs)
Fuel tank capacity 24.0 liters (6.3 US gal.; 5.3 Imp. gal)
Battery 12V, CCA: 433A
Cabin type Open operator station with two-post ROPS
Engine
Engine model D905-D18
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 0.9 L, 898 cm2, (54.8 cu·in)
Bore and stroke 72.0 mm X 73.6 mm (2.83 in X 2.9 in)
Horsepower 18.2 PS (13.4 kW; 18 HP)
Max. torque 51.0 Nm (5.2 kg·m; 37.64 ft·lb)
Starter Electric
Oil capacity: 3.0 L (3.17 US. qt, 2.64 Imp. qt.)
Coolant capacity: 3.8 L (4.02 US. qt, 3.34 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Integral type power
Brakes Wet disc type
Transmission model
Transmission type Gear shift with dry single plate type clutch
Gears 6 forward and 2 reverse
Speed Forward: 16.8 kmh (10.4 mph) Reverse: 6.6 (4.1 mph)
Transmission oil capacity 11.5 L (12.15 US. qt, 10.12 Imp. qt.)
Tires
Front tires Ag: 6-12B
Rear tires Ag: 8-16
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity 750 kg (1,654 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO spped 2,500 rpm
Rear PTO type
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type
Pump flow 4.4 gpm (16.7 lpm)
Total flow 7.0 gpm (26.5 lpm)
Steering flow 2.6 gpm (9.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*