The Kubota B2110 is a 2WD or 4WD compact utility tractor from the L series. This tractor was manufactured by the Kubota from 2000 to 2005. The Kubota B2110 is equipped with a 1.0 L three-cylinder diesel engine and one of two transmissions: gear shift transmission with dry single-plate type clutch and 6 forward and 2 reverse gears or hydrostatic transmission with infinite (2-range) forward and reverse gears.
The Kubota B2110 compact utility tractor used the Kubota D1005 engine. It is a 1 L, 1,001 cm2, (61.1 cu·in) three-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 73.6 mm (2.9 in) of the piston stroke. This engine produced 21.4 PS (15.7 kW; 21.0 HP) at 2,600 rpm of maximum output power.
The Kubota B2110 is equipped with integral type power steering, wet disc type brakes, open operator station with two-post ROPS and 24.0 liters (6.3 US gal.; 5.3 Imp. gal) fuel tank. The B2110DB used the “Bi-Speed Turn” mechanism.
Kubota B2110 Specifications
| General Specifications | |
| Model | Kubota B2110 |
| Length | 2,405 mm (94.7 in) |
| Width | 1,040 mm (40.9 in) |
| Height | 2,268 mm (89.3 in) |
| Wheel base | 1,500 mm (59.1 in) |
| Weight |
B2110D: 668 kg (1,472 lbs) B2110DB: 678 kg (1,495 lbs) B2110HDB: 694 kg (1,530 lbs) |
| Fuel tank capacity | 24.0 liters (6.3 US gal.; 5.3 Imp. gal) |
| Battery | 12V, CCA: 433A |
| Cabin type | Open operator station with two-post ROPS |
| Engine | |
| Engine model | Kubota D1005 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.0 L, 1,001 cm2, (61.1 cu·in) |
| Bore and stroke | 76.0 mm X 73.6 mm (2.99 in X 2.9 in) |
| Horsepower | 21.4 PS (15.7 kW; 21.0 HP) at 2,600 rpm |
| Torque | 59.0 N·m (6 kg·m, 43.5 ft·lb) |
| Starter | Electric |
| Oil capacity: | 3.0 L (3.17 US. qt, 2.64 Imp. qt.) |
| Coolant capacity: | 3.8 L (4.02 US. qt, 3.34 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Integral type power |
| Brakes | Wet disc type |
| Differential | Bevel gears |
| Transmission model | – |
| Transmission type | Gear shift with dry single plate type clutch |
| Gears | 6 forward and 2 reverse |
| Speed | Forward: 17.8 kmh (11.1 mph) Reverse: 7.0 (4.4 mph) |
| Transmission oil capacity | 11.5 L (3 US. gal, 2.5 Imp. gal.) |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Speed | Forward: 20.9 kmh (13 mph) Reverse: 16.7 (10.4 mph) |
| Transmission oil capacity | 12.5 L (3.3 US. gal, 2.7 Imp. gal.) |
| Tires | |
| Front tires | Ag: 6-12 |
| Rear tires | Ag: 9.5-16 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | Position control |
| Lift capacity (at ends) | 750 kg (1,654 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | – |
| Middle PTO spped | 2,500 rpm |
| Rear PTO type | Live |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pump flow | 4.4 gpm (16.7 lpm) |
| Steering flow | 2.6 gpm (9.8 lpm) |
| Total flow | 7.0 gpm (26.5 lpm) |
Be the first to comment