The Kubota B2201 is a 4WD compact utility tractor from the B series. This tractor has been manufactured by the Kubota since 2018. The Kubota B2201 is equipped with a 1.1 L three-cylinder diesel engine and mechanical shuttle transmission with 9 forward and 9 reverse gears.
The Kubota B2201 compact utility tractor used the Kubota D1105 engine. It is a 1.1 L, 1,123 cm2, (68.5 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. This engine produced 20 PS (14.7 kW; 19.7 HP) at 2,500 rpm of gross output power.
The Kubota B2201 is equipped with power steering, wet disc type brakes, open operator station with two-post ROPS and 27.0 liters (7.1 US gal.; 5.9 Imp. gal) fuel tank.
Following attachments are available for the Kubota B2201 compact utility tractor:
- Mid-mount Kubota: 54 in (1,370 mm) mower deck with 3-blades
- Mid-mount Kubota: 60 in (1,520 mm) mower deck with 3-blades
- Kubota LA424EC loader
Kubota B2201 Specifications
General Specifications | |
Model | Kubota B2201 |
Length | 2,730 mm (107.5 in) |
Width | 1,020 mm (40.2 in) |
Height | 2,300 mm (90.6 in) |
Wheel base | 1,500 mm (59.1 in) |
Weight | 810 kg (1,786 lbs) |
Fuel tank capacity | 27.0 liters (7.1 US gal.; 5.9 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | Kubota D1105 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.1 L, 1,123 cm2, (68.5 cu·in) |
Bore and stroke | 78.0 mm X 78.0 mm (3.07 in X 3.07 in) |
Horsepower | 20 PS (14.7 kW; 19.7 HP) at 2,500 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc type |
Differential lock | Mechanical rear |
Transmission model | – |
Transmission type | Mechanical shuttle |
Gears | 9 forward and 9 reverse |
Tires | |
Front tires | – |
Rear tires | – |
Three-Point Hitch | |
Caterogy | I |
Control type | Position control |
Lift capacity (at ends) | 970 kg (2,139 lbs) |
PTO (Power take-off shaft) | |
Middle PTO type | Optional |
Middle PTO spped | 2,500 rpm |
Rear PTO type | Transmission |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pressure | 2,347 psi (162 bar) |
Total flow | 8.7 gpm (32.9 lpm) |