Kubota B2320

Kubota B2320The Kubota B2320 is a 4WD compact utility tractor from the B2x20 series. This tractor was manufactured by the Kubota from 2008 to 2015. The Kubota B2320 is equipped with a 1.0 L three-cylinder diesel engine and one of two transmissions gear shift transmission with 9 forward and 3 reverse gears (B2320DT) or hydrostatic transmission with 3 forward and 3 reverse gears (B2320HSD).

The Kubota B2320 utility tractor used the Kubota D1005-E4-D22 engine. It is a 1.0 L, 1,001 cm2, (61 cu·in) three-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. This engine produced 21.2 PS (15.6 kW; 20.9 HP) at 2,800 rpm of gross horsepower. The PTO power is 18.2 PS (13.4 KW; 18.0 HP) for B2320DT version and 17.3 PS (12.7 KW; 17.0 HP) for B2320HSD version with hydrostatic transmission.

The Kubota B2320 is equipped with integral type power steering, wet disc type brakes, open operator station with two-post ROPS and 26.0 liters (6.9 US gal.; 5.7 Imp. gal) fuel tank.

Following attachments are available for Kubota B2320 utility tractor:

  • Kubota RCK54 mid-mount 54 in (1,370 mm) mower deck with 3-blades
  • Kubota RCK60 mid-mount 60 in (1,520 mm) mower deck with 3-blades
  • Kubota LA304 loader
  • Kubota BH65 backhoe

Kubota B2320 Specifications

General Specifications
Model Kubota B2320
Length 2,385 mm (93.9 in)
Width 1,145 mm (45.1 in)
Height 2,130 mm (83.9 in)
Wheel base 1,563 mm (61.5 in)
Weight B2320DT: 650 kg (1,430 lbs)
B2320HSD: 670 kg (1,480 lbs)
Fuel tank capacity 26.0 liters (6.9 US gal.; 5.7 Imp. gal)
Battery 12V, CCA: 430A
Cabin type Open operator station with two-post ROPS
Engine
Engine model Kubota D1005-E4-D22
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.0 L, 1,001 cm2, (61 cu·in)
Bore and stroke 76.0 mm X 73.0 mm (2.99 in X 2.87 in)
Horsepower 21.2 PS (15.6 kW; 20.9 HP) at 2,800 rpm
Torque 60.0 N·m (6.1 kg·m, 44.2 ft·lb)
Starter Electric
Oil capacity: 3.1 L (3.28 US. qt, 2.73 Imp. qt.)
Coolant capacity: 3.9 L (4.12 US. qt, 3.43 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Integral type power steering
Brakes Wet disc type
Transmission model
Transmission type Gear shift with dry single plate type clutch
Gears 9 forward and 3 reverse
Speed Forward: 18.0 kmh (11.2 mph) Reverse: 8.7 (5.4 mph)
Transmission oil capacity 14.0 L (14.79 US. qt, 12.32 Imp. qt.)
Transmission model
Transmission type Hydrostatic
Gears 3 range gear shift (3 forward and 3 reverse)
Speed Forward: 18.9 kmh (11.7 mph) Reverse: 15.1 (9.4 mph)
Transmission oil capacity 15.0 L (15.85 US. qt, 13.2 Imp. qt.)
Tires
Front tires Ag: 6-12
Rear tires Ag: 9.5-16
Three-Point Hitch
Caterogy I
Control type
Lift capacity 615 kg (1356 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO spped 2,500 rpm
Rear PTO type Transmission, live (hydrostatic)
Rear PTO spped 540/960 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity B2320DT: 14.0 L (14.79 US. qt, 12.32 Imp. qt.)
B2320HSD: 15.0 L (15.85 US. qt, 13.2 Imp. qt.)
Valves 1 or 2
Pump flow 4.7 gpm (17.8 lpm)
Total flow 8.3 gpm (31.4 lpm)
Steering flow 3.6 gpm (13.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*