The Kubota B26 is a 4WD backhoe loader tractor from the B series. This tractor has been manufactured by the Kubota since 2007. The Kubota B26 tractor is equipped with a 1.1 L three-cylinder diesel engine and hydrostatic transmission with infinite (3-range) forward and reverse gears.
The Kubota B26 backhoe loader tractor used the Kubota D1105 engine. It is a 1.1 L, 1,123 cm2, (68.5 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 78.4 mm (3.09 in) of the piston stroke. This engine produced 26.4 PS (19.4 kW; 26.0 HP) at 2,800 rpm of gross horsepower and 19.7 PS (14.5 KW; 19.4 HP) of PTO output power.
The Kubota B26 is equipped with hydrostatic power steering, wet disc type brakes, four-post ROPS with FOPS canopy (standard) and 31.0 liters (8.2 US gal.; 6.8 Imp. gal) fuel tank.
Following attachments are available for the Kubota B26 backhoe loader tractor:
- Kubota loader
- Kubota backhoe
Kubota B26 Specifications
| General Specifications | |
| Model | Kubota B26 |
| Length | With backhoe/loader: 3,780 mm (148.8 in) Without 3P: 2,557 mm (100.7 in) |
| Width | 1,365 mm (53.7 in) |
| Height | 2,273 mm (89.5 in) |
| Wheel base | 1,580 mm (62.2 in) |
| Weight | 1,182 kg (2,605 lbs) |
| Fuel tank capacity | 31.0 liters (8.2 US gal.; 6.8 Imp. gal) |
| Battery | 12V, CCA: 433A |
| Cabin type | Four-post ROPS with FOPS canopy standard. |
| Engine | |
| Engine model | Kubota D1105 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.1 L, 1,123 cm2, (68.5 cu·in) |
| Bore and stroke | 78.0 mm X 78.4 mm (3.07 in X 3.09 in) |
| Horsepower | 26.4 PS (19.4 kW; 26 HP) at 2,800 rpm |
| Torque | 77.6 N·m (7.9 kg·m, 57.2 ft·lb) |
| Starter | Electric |
| Oil capacity: | 3.0 L (3.2 US. qt, 2.6 Imp. qt.) |
| Coolant capacity: | 4.5 L (4.8 US. qt, 4 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Wet disc type |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (3-range) forward and reverse |
| Speed | Forward: 17.8 kmh (11.1 mph) Reverse: 15.8 (9.8 mph) |
| Transmission oil capacity | 26.0 L (6.9 US. gal, 5.7 Imp. gal.) |
| Tires | |
| Front tires | Lawn/turf 24×8.50-14 Industrial: 24×8.50-14 |
| Rear tires | Lawn/turf 13.6-16 Industrial: 12.4-16 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | Position control |
| Lift capacity (at ends) | 970 kg (2,139 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 1 to 3 |
| Pump flow | 7.0 gpm (26.5 lpm) |
| Total flow | 11.2 gpm (42.4 lpm) |
Be the first to comment