Kubota B2710 HSD

Kubota B2710 HSDThe Kubota B2710 HSD is a 4WD compact utility tractor from the B series. The B2710 tractor was manufactured by the Kubota from 2000 to 2005. The Kubota B2710 HSD is equipped with a 1.3 L four-cylinder diesel engine and hydrostatic type transmission with infinite (3-range) forward and reverse gears.

The Kubota B2710HSD compact utility tractor used the Kubota V1305-E-D12 engine. It is a 1.3 L, 1,335 cm2, (81.5 cu·in) four-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 73.6 mm (2.9 in) of the piston stroke. This engine produced 27.3 PS (20.1 kW; 27.0 HP) of gross output power and 20.3 PS (14.9 KW; 20.0 HP) of PTO power.

The Kubota B2710HSD is equipped with integral type power steering, wet disc type brakes, open operator station with two-post ROPS and 26.0 liters (6.9 US gal.; 5.7 Imp. gal) fuel tank.

Kubota B2710 HSD Specifications

General Specifications
ModelKubota B2710 HSD
Length2,520 mm (99.2 in)
Width1,365 mm (53.7 in)
Height2,335 mm (91.9 in)
Wheel base1,665 mm (65.6 in)
Weight790 kg (1,740 lbs)
Fuel tank capacity26.0 liters (6.9 US gal.; 5.7 Imp. gal)
Battery12V, CCA: 433A
Cabin typeOpen operator station with two-post ROPS
Engine modelKubota V1305-E-D12
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement1.3 L, 1335 cm2, (81.5 cu·in)
Bore and stroke76.0 mm X 73.6 mm (2.99 in X 2.9 in)
Horsepower27.3 PS (20.1 kW; 27.0 HP)
Torque79.0 N·m (8.1 kg·m, 58.2 ft·lb)
Oil capacity:4.1 L (4.33 US. qt, 3.61 Imp. qt.)
Coolant capacity:4.5 L (4.76 US. qt, 3.96 Imp. qt.)
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeIntegral type power
BrakesWet disk type
Front axle case4.5 L (4.8 US. qt, 4.0 Imp. qt.)
Transmission model
Transmission typeHydrostatic type
GearsInfinite (3-range) forward and reverse
Speed Forward: 19.1 kmh (11.9 mph) Reverse: 15.2 (9.4 mph)
Transmission oil capacity 14.5 L (3.83 US. gals, 3.2 Imp. gals.)
S/n below 15496: 14.0 L (3.70 US. gals, 3.1 Imp. gals.)
Front tiresAg: 7-12
Rear tiresAg: 12.4-16
Three-Point Hitch
Control typePosition control
Lift capacity750 kg (1,655 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO spped2,500 rpm
Rear PTO type
Rear PTO spped540 rpm
Hydraulic system
Hydraulic typeOpen center
Pump flow6.4 gpm (24.2 lpm)
Total flow9.5 gpm (36 lpm)
Steering flow3.1 gpm (11.7 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.