Kubota B2910 HSD

Kubota B2910 HSDThe Kubota B2910 HSD is a 4WD compact utility tractor from the B series. This tractor was manufactured by the Kubota from 2000 to 2005. The Kubota B2910 HSD is equipped with a 1.5 L four-cylinder diesel engine and hydrostatic type transmission with infinite (3-range) forward and reverse gears.

The Kubota B2910 HSD compact utility tractor used the Kubota V1505-E-D16 engine. It is a 1.5 L, 1,498 cm2, (91.4 cu·in) four-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 78.4 mm (3.09 in) of the piston stroke. This engine produced 30.3 PS (22.3 kW; 30.0 HP) of gross horsepower and 22.3 PS (16.4 KW; 22.0 HP) of PTO output power.

The Kubota B2910 HSD is equipped with integral type power steering, wet disc type brakes, open operator station with two-post ROPS (rollover protection structure) and 26.0 liters (6.9 US gal.; 5.7 Imp. gal) fuel tank.

Kubota B2910 HSD Specifications

General Specifications
Model Kubota B2910 HSD
Length 2,520 mm (99.2 in)
Width 1,365 mm (53.7 in)
Height 2,335 mm (91.9 in)
Wheel base 1,665 mm (65.6 in)
Weight 800 kg (1763.7 lbs)
Fuel tank capacity 26.0 liters (6.9 US gal.; 5.7 Imp. gal)
Battery 12V, CCA: 433A
Cabin type Open operator station with two-post ROPS
Engine
Engine model Kubota V1505-E-D16
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 1.5 L, 1,498 cm2, (91.4 cu·in)
Bore and stroke 78.0 mm X 78.4 mm (3.07 in X 3.09 in)
Horsepower 30.3 PS (22.3 kW; 30.0 HP)
Torque 89.0 N·m (9.1 kg·m, 65.6 ft·lb)
Starter Electric
Oil capacity: 4.1 L (4.33 US. qt, 3.61 Imp. qt.)
Coolant capacity: 4.5 L (4.76 US. qt, 3.96 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Integral type power
Brakes Wet disk type
Transmission model
Transmission type Hydrostatic type
Gears Infinite (3-range) forward and reverse
Speed Forward: 19.1 kmh (11.9 mph) Reverse: 15.2 (9.4 mph)
Transmission oil capacity 14.5 L (15.32 US. qt, 12.76 Imp. qt.)
Tires
Front tires Ag: 7-12
Rear tires Ag: 12.4-16
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity 780 kg (1,720 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO spped 2,500 rpm
Rear PTO type
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 14.5 L (15.32 US. qt, 12.76 Imp. qt.)
Valves 2
Pump flow 6.4 gpm (24.2 lpm)
Total flow 9.5 gpm (36 lpm)
Steering flow 3.1 gpm (11.7 lpm)