The Kubota B7300 is a 4WD utility tractor from the B series. This tractor was manufactured by the Kubota from 1997 to 1999. The Kubota B7300 is equipped with 0.7 L three-cylinder diesel engine and hydrostatic transmission (HST) with infinite (2-range) forward and reverse gears.
The Kubota B7300 utility tractor used the Kubota D722 engine. It is a 0.7 L, 719 cm2, (43.9 cu·in) three-cylinder natural aspirated diesel engine with 67.0 mm (2.64 in) of the cylinder bore and 68.0 mm (2.68 in) of the piston stroke. This engine produced 16.2 PS (11.9 kW; 16.0 HP) of horsepower.
The Kubota B7300 is equipped with a manual steering, open operator station with two-post ROPS and 12.9 liters (3.4 US gal.; 2.8 Imp. gal) fuel tank. The B7300 tractor can be equipped with a Kubota LA271 loader.
Kubota B7300 Specifications
| General Specifications | |
| Model | Kubota B7300 HST |
| Length | 2,250 mm (88.6 in) |
| Width | 1,150 mm (45.3 in) |
| Height | 1,890 mm (74.4 in) |
| Wheel base | 1,490 mm (58.7 in) |
| Weight | 595 kg (1312 lbs) |
| Fuel tank capacity | 12.9 liters (3.4 US gal.; 2.8 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station with two-post ROPS |
| Engine | |
| Engine model | Kubota D722 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 0.7 L, 719 cm2, (43.9 cu·in) |
| Bore and stroke | 67.0 mm X 68.0 mm (2.64 in X 2.68 in) |
| Horsepower | 16.2 PS (11.9 kW; 16 HP) |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Manual |
| Brakes | – |
| Transmission model | – |
| Transmission type | Hydrostatic (HST) |
| Gears | Infinite (2-range) forward and reverse |
| Tires | |
| Front tires | Ag: 6-12 Lawn/turf: 21×8.00-10 |
| Rear tires | Ag: 8.3-16 Lawn/turf: 31×15.5-15, 29×12.5-15 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity | 498 kg (1,098 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Live |
| Rear PTO spped | 540,2,451 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pump flow | 3.9 gpm (14.8 lpm) |
Be the first to comment