Kubota BX1850

Kubota BX1850The Kubota BX1850 is a 4WD compact utility tractor from the BX50 series. This tractor was manufactured by Kubota from 2006 to 2008. The Kubota BX1850 is equipped with a 0.7 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.

The Kubota BX1850 compact utility tractor used the Kubota D722 engine. It is a 0.7 L, 719 cm2, (43.9 cu·in) three-cylinder natural aspirated diesel engine with 67.0 mm (2.64 in) of the cylinder bore and 68.0 mm (2.68 in) of the piston stroke. This engine produced 18.2 PS (13.4 kW; 18.0 HP) at 3,200 rpm of output power.

The Kubota BX1850 is equipped with hydrostatic power steering, wet disc type brakes, two-post ROPS (canopy was available as an option) and 25.0 liters (6.6 US gal.; 5.5 Imp. gal) fuel tank. This tractor could be used with the Kubota LA203 loader.

Kubota BX1850 Specifications

General Specifications
Model Kubota BX1850
Length 2,330 mm (91.7 in)
Width 1,130 mm (44.5 in)
Height 1,760 mm (69.3 in)
Wheel base 1,340 mm (52.8 in)
Weight 570 kg (1,255 lbs)
Fuel tank capacity 25.0 liters (6.6 US gal.; 5.5 Imp. gal)
Battery 12V, CCA: 435A
Cabin type Two-post fixed ROPS, Canopy (optional)
Engine
Engine model Kubota D722
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 0.7 L, 719 cm2, (43.9 cu·in)
Bore and stroke 67.0 mm X 68.0 mm (2.64 in X 2.68 in)
Horsepower 18.2 PS (13.4 kW; 18.0 HP) at 3,200 rpm
Starter Electric
Oil capacity: 2.9 L (3.1 US. qt, 2.6 Imp. qt.)
Coolant capacity: 2.9 L (3.1 US. qt, 2.6 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc type
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 12.6 kmh (7.8 mph) Reverse: 9.2 (5.7 mph)
Transmission oil capacity 11.7 L (3.1 US. gal, 2.6 Imp. gal.)
Tires
Front tires Lawn/turf: 16×7.5-8
Rear tires Lawn/turf: 24×12-12
Three-Point Hitch
Caterogy I
Control type
Lift capacity (at ends) 450 kg (992 lbs)
PTO (Power take-off shaft)
Middle PTO type Independent
Middle PTO spped 2,500 rpm
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 11.7 L (12.36 US. qt, 10.29 Imp. qt.)
Pump flow 6.3 gpm (23.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*