Kubota L225

Kubota L225The Kubota L225 is a 2WD (L225) or 4WD (L225DT) compact utility tractor from the L series. This tractor was manufactured by the Kubota from 1974 to 1976. The Kubota L225 is equipped with a 1.1 L three-cylinder diesel engine and gear shift transmission with dry type clutch with 8 forward and 2 reverse gears.

The Kubota L225 compact utility tractor used the Kubota D1100A engine. It is a 1.1 L, 1119 cm2, (68.3 cu·in) three-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 82.0 mm (3.23 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 2,700 rpm of output power. The compression ratio rating is 21.0:1.

The Kubota L225 is equipped with manual steering, differential mechanical expanding shoe brakes and open operator station.

Kubota L225 Specifications

General Specifications
Model Kubota L225
Length –
Width –
Height –
Wheel base 1,530 mm (60.2 in)
Weight 905 kg (1,995 lbs)
Fuel tank capacity –
Battery 12V
Cabin type Open operator station
Engine
Engine model Kubota D1100A
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.1 L, 1,119 cm2, (68.3 cu·in)
Bore and stroke 76.0 mm X 82.0 mm (2.99 in X 3.23 in)
Compression ratio 21.0:1
Horsepower 24.3 PS (17.9 kW; 24.0 HP) at 2,700 rpm
Starter Electric
Oil capacity: 5.3 L (5.6 US. qt, 4.66 Imp. qt.)
Coolant capacity: 6.8 L (7.19 US. qt, 5.98 Imp. qt.)
Intake / Exhaust valve clearance (cold): 0.20 mm (0.008 in)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual
Brakes Differential mechanical expanding shoe
Front axle 0.9 L (0.95 US .qts., 0.79 Imp. qts.)
Front diff 1.0 L (1.06 US. qts., 0.88 Imp. qts.)
Transmission model –
Transmission type Gear shift with dry type clutch
Gears 8 forward and 2 reverse
Speed Forward: 21.1 kmh (13.1 mph) Reverse: 14.5 (9 mph)
Transmission oil capacity 22.0 L (5.8 US. gal, 4.8 Imp. gal.)
Tires
Front tires Ag: 4.00-15
Rear tires Ag: 9.5-24
Three-Point Hitch
Caterogy I
Control type –
Lift capacity –
PTO (Power take-off shaft)
Rear PTO type –
Rear PTO spped 540/1000 rpm
Hydraulic system
Hydraulic type –
Pressure 1700 psi (117.2 bar)
Total flow 3.7 gpm (14 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*