The Kubota L2850 is a 2WD (L2850F) or 4WD (L2850DT) compact utility tractor from the L series. This tractor was manufactured by the Kubota from 1985 to 1990. The Kubota L2850 compact tractor is equipped with a 1.7 L four-cylinder diesel engine and one of three transmissions: mechanical shuttle transmission with 8 forward and 7 reverse gears, partially synchronized transmission with 8 forward and 7 reverse gears or power shift transmission with 8 forward and 8 reverse gears.
The Kubota L2850 compact utility tractor used the Kubota V1702-DI-A engine. It is a 1.7 L, 1,732 cm2, (105.7 cu·in) four-cylinder natural aspirated diesel engine with 82.0 mm (3.23 in) of the cylinder bore and 82.0 mm (3.23 in) of the piston stroke. This engine produced 34.5 PS (25.4 kW; 34.0 HP) at 2,600 rpm of gros output power.
The Kubota L2850 is equipped with manual or power (option) steering, differential wet disc brakes, open operator station with two-post ROPS and 29.0 liters (7.7 US gal.; 6.4 Imp. gal) fuel tank.
Following attachments are available for the Kubota L2850 compact utility tractor:
- Mid-mount Kubota RC72-28 72 in (1,820 mm) with 3-blades
- Rear-mount Kubota FL1021 tiller
- Rear-mount Kubota FL1271 tiller
- Kubota BF500 loader
- Kubota BL4520 backhoe
Kubota L2850 Specifications
| General Specifications | |
| Model | Kubota L2850 |
| Length | 2,900 mm (114.2 in) |
| Width | 1,360 mm (53.5 in) |
| Height | 1,980 mm (78 in) |
| Wheel base | 1,730 mm (68.1 in) |
| Weight | 1,260 kg (2,778 lbs) |
| Fuel tank capacity | 29.0 liters (7.7 US gal.; 6.4 Imp. gal) |
| Battery | 12V, 110Ah |
| Cabin type | Open operator station with two-post ROPS |
| Engine | |
| Engine model | Kubota V1702-DI-A |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 1.7 L, 1,732 cm2, (105.7 cu·in) |
| Bore and stroke | 82.0 mm X 82.0 mm (3.23 in X 3.23 in) |
| Compression ratio | 18.0: |
| Horsepower | 34.5 PS (25.4 kW; 34.0 HP) at 2,600 rpm |
| Starter | Electric |
| Oil capacity: | 8.4 L (8.9 US. qt, 7.4 Imp. qt.) |
| Coolant capacity: | 7.0 L (7.4 US. qt, 6.2 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Manual or power (option) |
| Brakes | Differential wet disc |
| Differential lock | Rear standard |
| Transmission model | – |
| Transmission type | Mechanical shuttle |
| Gears | 8 forward and 7 reverse |
| Speed | Forward: 21.7 kmh (13.5 mph) Reverse: 13.8 (8.6 mph) |
| Transmission oil capacity | 31.0 L (8.2 US. gal, 6.8 Imp. gal.) |
| Transmission model | – |
| Transmission type | Partially synchronized |
| Gears | 8 forward and 7 reverse |
| Speed | Forward: 20.8 kmh (12.9 mph) Reverse: 13.2 (8.2 mph) |
| Transmission oil capacity | 31.0 L (8.2 US. gal, 6.8 Imp. gal.) |
| Transmission model | GST |
| Transmission type | Glide shift witj wet disc clutch |
| Gears | 8 forward and 8 reverse |
| Speed | Forward: 21.4 kmh (13.3 mph) Reverse: 19.1 (11.9 mph) |
| Tires | |
| Front tires | Ag: 5.00-15 (2WD), 7-16 (4WD) |
| Rear tires | Ag: 11.2-24 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | Position control and draft control |
| Lift capacity (at ends) | 1,100 kg (2,430 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Optional |
| Middle PTO spped | 1,080/2,000 rpm |
| Rear PTO type | Continuous or live (optional) |
| Rear PTO spped | 540/1,000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 31.0 L (32.76 US. qt, 27.28 Imp. qt.) |
| Pressure | 2275 psi (156.9 bar) |
| Valves | 1 to 3 |
| Pump flow | 6.7 gpm (25.4 lpm) |
| Steering flow | 2.8 gpm (10.6 lpm) |
| Total flow | 9.5 gpm (36 lpm) |
Be the first to comment