The Kubota L355SS is a 4WD compact utility tractor from the L series manufactured by Kubota. The Kubota L355SS is equipped with a 1.7 L three-cylinder diesel engine and gear type transmission with 8 forward and 8 reverse gears.
The Kubota L355SS compact utility tractor used the Kubota D1702 engine. It is a 1.7 L, 1,732 cm2, (105.7 cu·in) three-cylinder natural aspirated diesel engine with 82.0 mm (3.23 in) of the cylinder bore and 82.0 mm (3.23 in) of the piston stroke. This engine produced 36.6 PS (26.9 kW; 36.0 HP) of output power.
The Kubota L355SS is equipped with integral type power steering, wet disc type brakes, open operator station and 33.5 liters (8.8 US gal.; 7.4 Imp. gal) fuel tank.
Kubota L355SS Specifications
| General Specifications | |
| Model | Kubota L355SS |
| Length | 3,310 mm (130.3 in) |
| Width | 1,630 mm (64.2 in) |
| Height | 2,065 mm (81.3 in) |
| Wheel base | 1,945 mm (76.6 in) |
| Weight | 1,370 kg (3,020 lbs) |
| Fuel tank capacity | 33.5 liters (8.8 US gal.; 7.4 Imp. gal) |
| Battery | 12V, CCA: 100Ah |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Kubota D1702 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.7 L, 1,732 cm2, (105.7 cu·in) |
| Bore and stroke | 82.0 mm X 82.0 mm (3.23 in X 3.23 in) |
| Horsepower | 36.6 PS (26.9 kW; 36.0 HP) |
| Starter | Electric |
| Oil type | API: CC or CD |
| Oil capacity: | 9.1 L (9.6 US. qt, 8 Imp. qt.) |
| Coolant capacity: | 7.0 L (7.4 US. qt, 6.2 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 4WD |
| Steering type | Integral type power |
| Brakes | Wet disc type |
| Differential | Bevel gear |
| Transmission model | – |
| Transmission type | Gear type with full power shuttle |
| Gears | 8 forward and 8 reverse |
| Speed | Forward: 21.2 kmh (13.2 mph) Reverse: 21.2 (13.2 mph) |
| Transmission oil capacity | 32.0 L (8.5 US. gal, 7 Imp. gal.) |
| Tires | |
| Front tires | Ag: 8.3-16 |
| Rear tires | Ag: 13.6-24 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity (at ends) | – |
| Hydraulic system | |
| Hydraulic type | Open center |