Kubota L39

Kubota L39The Kubota L39 is a 4WD backhoe loader tractor from the B series. This tractor has been manufactured by the Kubota since 2005. The Kubota L39 is equipped with a 1.8 L three-cylinder diesel engine and glide shift transmission with 12 forward and 8 reverse gears.

The Kubota L39 backhoe loader tractor used the Kubota D1803 engine. It is a 1.8 L, 1,826 cm2, (111.4 cu·in) three-cylinder natural aspirated diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 102.4 mm (4.03 in) of the piston stroke. This engine produced 39.6 PS (29.1 kW; 39.0 HP) of maximum output power.

The Kubota L39 is equipped with hydrostatic power steering, wet disc type brakes, four-post ROPS with FOPS canopy and 40.0 liters (10.6 US gal.; 8.8 Imp. gal) fuel tank.

Following attachments are available for the Kubota L39 backhoe loader tractor:

  • Kubota TL1000 loader
  • Kubota BT1000 backhoe

Kubota L39 Specifications

General Specifications
Model Kubota L39
Length (with loader and backhoe) 5,942 mm (233.9 in)
Width
Height
Wheel base 1,750 mm (68.9 in)
Weight (with loader and backhoe) 3,170 kg (6,988)
Fuel tank capacity 40.0 liters (10.6 US gal.; 8.8 Imp. gal)
Battery 12V, 80Ah
Cabin type Four-post ROPS with FOPS canopy
Engine
Engine model Kubota D1803
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.8 L, 1,826 cm2, (111.4 cu·in)
Bore and stroke 87.0 mm X 102.4 mm (3.43 in X 4.03 in)
Horsepower 39.6 PS (29.1 kW; 39.0 HP)
Starter Electric
Oil capacity: 5.7 L (6 US. qt, 5 Imp. qt.)
Coolant capacity: 7.5 L (7.9 US. qt, 6.6 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc type
Differential lock Rear standard
Transmission model Kubota GST
Transmission type Glide Shift
Gears 12 forward and 8 reverse
Speed Forward: 23.0 kmh (14.3 mph) Reverse: (0 mph)
Transmission oil capacity 61.5 L (16.2 US. gal, 13.5 Imp. gal.)
Tires
Front tires Lawn/turf: 27×10.50LLx15
Rear tires Lawn/turf: 16.5Lx16.1
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity (at 610 mm) 1,270 kg (2,800 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 61.5 L (64.99 US. qt, 54.11 Imp. qt.)
Pump flow 23.4 gpm (88.7 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*