Kubota L45

Kubota L45The Kubota L45 is a 4WD backhoe loader tractor from the L series. This tractor was manufactured by the Kubota from 2009 to 2015. The Kubota L45 is equipped with a 2.2 L four-cylinder diesel engine and hydrostatic transmission with infinite (3-range) forward and reverse gears.

The Kubota L45 backhoe loader tractor used the Kubota V2203 engine. It is a 2.2 L, 2,197 cm2, (134.1 cu·in) four-cylinder natural aspirated diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 92.4 mm (3.64 in) of the piston stroke. This engine produced 45.7 PS (33.6 kW; 45.0 HP) at 2,700 rpm of maximum output power.

The Kubota L45 is equipped with hydrostatic power steering, mechanical wet disc brakes, four-post ROPS with FOPS canopy and 45.0 liters (11.9 US gal.; 9.9 Imp. gal) fuel tank.

Following attachments are available for the Kubota L45 backhoe loader tractor:

  • Kubota TL1000A loader
  • Kubota BT1000A backhoe

Kubota L45 Specifications

General Specifications
Model Kubota L45
Length 6,010 mm (236.6 in)
Width 1,840 mm (72.4 in)
Height 2,410 mm (94.9 in)
Wheel base 1,840 mm (72.4 in)
Weight 3,225 kg (7,110 lbs)
Fuel tank capacity 45.0 liters (11.9 US gal.; 9.9 Imp. gal)
Battery 12V, 80Ah
Cabin type Four-post ROPS with FOPS canopy
Engine
Engine model Kubota V2203
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.2 L, 2,197 cm2, (134.1 cu·in)
Bore and stroke 87.0 mm X 92.4 mm (3.43 in X 3.64 in)
Horsepower 45.7 PS (33.6 kW; 45.1 HP) at 2,700 rpm
Starter Electric
Coolant capacity: 6.5 L (6.9 US. qt, 5.7 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Mechanical wet disc
Differential lock Rear standard
Transmission model HST Plus
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Speed Forward: 24.0 kmh (14.9 mph) Reverse: (0 mph)
Transmission oil capacity 46.2 L (12.2 US. gal, 10.2 Imp. gal.)
Tires
Front tires Lawn/turf: 27×10.50LL-15
Industrial: 27×10.5-15
Rear tires Lawn/turf: 16.5L-16.1
Industrial: 15×19.5
Three-Point Hitch
Caterogy I (optional)
Control type
Lift capacity (at ends) 1,750 kg (3,860 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 46.2 L (48.82 US. qt, 40.65 Imp. qt.)
Valves 1 to 3
Steering flow 6.6 gpm (25 lpm)
Total flow 25.0 gpm (94.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*