The Kubota L48 is a 4WD backhoe loader tractor from the B series. This tractor was manufactured by the Kubota from 2000 to 2009. The Kubota L48 is equipped with a 2.4 L four-cylinder diesel engine and hydrostatic transmission with infinite (3-range) forward and reverse gears.
The Kubota L48 backhoe loader tractor used the Kubota engine. It is a 2.4 L, 2,434 cm2, (148.5 cu·in) four-cylinder natural aspirated diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 102.4 mm (4.03 in) of the piston stroke. This engine produced 48.7 PS (35.8 kW; 48.0 HP) at 2,800 rpm of maximum output power.
The Kubota L48 is equipped with hydrostatic power steering, wet disc type brakes, four-post FOPS canopy and 50.0 liters (13.2 US gal.; 11 Imp. gal) fuel tank.
Following attachments are available for the Kubota L48 backhoe loader tractor:
- Kubota TL1150 loader
- Kubota BT1100 backhoe
Kubota L48 Specifications
| General Specifications | |
| Model | Kubota L48 |
| Length | 6,120 mm (240.9 in) |
| Width | 1,890 mm (74.4 in) |
| Height | 3,040 mm (119.7 in) |
| Wheel base | 1,870 mm (73.6 in) |
| Weight (with loader and backhoe) | 3,520 kg (7,760 lbs) |
| Fuel tank capacity | 50.0 liters (13.2 US gal.; 11 Imp. gal) |
| Battery | 12V |
| Cabin type | Four-post FOPS canopy |
| Engine | |
| Engine model | Kubota |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 2.4 L, 2,434 cm2, (148.5 cu·in) |
| Bore and stroke | 87.0 mm X 102.4 mm (3.43 in X 4.03 in) |
| Horsepower | 48.7 PS (35.8 kW; 48.0 HP) at 2,800 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Wet disc type |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (3-range) forward and reverse |
| Speed | Forward: 24.6 kmh (15.3 mph) Reverse: (0 mph) |
| Tires | |
| Front tires | Industrial: 10-16.5 |
| Rear tires | Industrial: 17.5L-24 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | Position control |
| Lift capacity (at ends) | 1,500 kg (3,308 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Live-continuous |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2,800 psi (193.1 bar) |
| Total flow | 25.9 gpm (98 lpm) |
Be the first to comment