Kubota L5240

Kubota L5240The Kubota L5240 is a 4WD compact utility tractor from the L40 series. This tractor was manufactured by the Kubota from 2007 to 2017. The Kubota L5240 is equipped with a 2.4 L four-cylinder diesel engine and hydrostatic transmission with infinite (3-range) forward and reverse gears.

The Kubota L5240 compact utility tractor used the Kubota V2403-M- TE2-HST1 engine. It is a 2.4 L, 2,432 cm2, (148.4 cu·in) four-cylinder natural aspirated diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 102.4 mm (4.03 in) of the piston stroke. This engine produced 52.8 PS (38.8 kW; 52.0 HP) of net output power.

The Kubota L5240 is equipped with hydrostatic power steering, wet disc type brakes, open operator station with two-post ROPS (L5240HST) or Cab (L5240HSTC) and 54.0 liters (14.3 US gal.; 11.9 Imp. gal) fuel tank.

Following attachments are available for Kubota L5240 compact utility tractor:

  • Front-mount Kubota L2184: 84 in (2,130 mm) blade
  • Front-mount Kubota L2195: 72 in (1,820 mm) dual-stage snow blower with hydraulic lift
  • Kubota LA854 loader
  • Kubota BH92 backhoe

Kubota L5240 Specifications

General Specifications
Model Kubota L5240
Length 3,250 mm (128 in)
Width 1,570 mm (61.8 in)
Height 2,490 mm (98 in)
Wheel base 1,915 mm (75.4 in)
Weight L5740HST: 1,745 kg (3,847 lbs)
L5740HSTC: 1,920 kg (4,225 lbs)
Fuel tank capacity 54.0 liters (14.3 US gal.; 11.9 Imp. gal)
Battery 12V, CCA: 582A
Cabin type Open operator station with two-post ROPS (L5240HST) or Cab (L5240HSTC)
Engine
Engine model Kubota V2403-M-TE2-HST1
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.4 L, 2,432 cm2, (148.4 cu·in)
Bore and stroke 87.0 mm X 102.4 mm (3.43 in X 4.03 in)
Horsepower 52.8 PS (38.8 kW; 52.0 HP)
Torque 180.6 N·m (18.4 kg·m, 133.1 ft·lb)
Starter Electric
Oil capacity: 9.4 L (9.93 US. qt, 8.27 Imp. qt.)
Coolant capacity: 8.2 L (8.66 US. qt, 7.21 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc type
Transmission model HST Plus
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Speed Forward: 24.9 kmh (15.5 mph) Reverse: 22.4 (13.9 mph)
Transmission oil capacity 45.0 L (11.9 US. gal, 9.9 Imp. gal.)
Tires
Front tires Ag: 9.5-16
Rear tires Ag: 13.6-28
Three-Point Hitch
Caterogy II/I
Control type Position control
Lift capacity 1,750 kg (3,859 lbs)
PTO (Power take-off shaft)
Middle PTO type Semi-independent
Middle PTO spped 2,000 rpm
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 45.0 L (47.55 US. qt, 39.59 Imp. qt.)
Valves 2 to 3
Pump flow 9.4 gpm (35.6 lpm)
Total flow 14.3 gpm (54.1 lpm)
Steering flow 4.9 gpm (18.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*