Kubota M5040

Kubota M5040The Kubota M5040 is a 2WD or 4WD utility tractor from the M series. This tractor was manufactured by the Kubota from 2007 to 2010. The Kubota M5040 is equipped with a 3.1 L four-cylinder diesel engine and one of two transmissions: synchronized shuttle transmission with 8 forward and 8 reverse gears or power shuttle transmission with 8 forward and 8 reverse gears. The Kubota M5040 could be also equipped with creeper (12 forward and 12 reverse gears).

The Kubota M5040 utility tractor used the Kubota V3007-DI engine. It is a 3.1 L, 3,053 cm2, (186.3 cu·in) four-cylinder natural aspirated diesel engine with 94.0 mm (3.7 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 51.1 PS (37.6 kW; 50.5 HP) of net horsepower and 45.7 PS (33.6 KW; 45.0 HP) of PTO output power.

The Kubota M5040 is equipped with hydrostatic power steering, multiple wet discs brakes, open operator station with two-post ROPS or Cab with air-conditioning (option) and 70.0 liters (18.5 US gal.; 15.4 Imp. gal) fuel tank for ROPS version or 110.0 liters (29.1 US gal, 24.2 Imp. gal) fuel tank for Cab version.

Following attachments are available for the Kubota M5040 utility tractor:

  • Kubota LA1153 Height Position loader
  • Kubota LA1153 Power Position loader
  • Kubota M4011 backhoe

Kubota M5040 Specifications

General Specifications
ModelKubota M5040
Length 2WD: 3,565 mm (140.4 in)
4WD: 3,445 mm (136.0 in)
Width1,860 mm (73.2 in)
Height ROPS: 2,420 mm (95.3 in)
Cab: 2,490 mm (98.2 in)
Wheel base 2WD with ROPS: 2,085 mm (82.1 in)
2WD with Cab: 2,140 mm (84.4 in)
4WD with ROPS: 2,040 mm (80.7 in)
4WD with Cab: 2,110 mm (83.1 in)
Weight 2WD with ROPS: 2,050 kg (4,519 lbs)
4WD with ROPS: 2,120 kg (4,674 lbs)
Fuel tank capacity ROPS: 70.0 liters (18.5 US gal.; 15.4 Imp. gal)
Cab: 110.0 liters (29.1 US gal, 24.2 Imp. gal)
Battery12V, CCA: 900A
Cabin typeOpen operator station with two-post ROPS. Cab with air-conditioning (option)
Engine modelKubota V3007-DI
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement3.1 L, 3,053 cm2, (186.3 cu·in)
Bore and stroke94.0 mm X 110.0 mm (3.7 in X 4.33 in)
Horsepower51.1 PS (37.6 kW; 50.5 HP)
Torque178.5 N·m (18.2 kg·m, 131.6 ft·lb) at 1300 rpm
Oil capacity:11.0 L (11.62 US. qt, 9.68 Imp. qt.)
Coolant capacity:8.0 L (8.45 US. qt, 7.04 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesMultiple wet discs
DifferentialBevel gears with differential lock (rear)
Transmission modelSynchro-Shuttle
Transmission typeSynchronized shuttle
Gears8 forward and 8 reverse
Transmission modelHydraulic Shuttle
Transmission typePower shuttle
Gears8 forward and 8 reverse
Transmission model
Transmission typeCreeper
Gears12 forward and 12 reverse
Front tiresAg: 6.5-16 (2WD), 9.5-24 (4WD)
Rear tiresAg: 14.9-28
Three-Point Hitch
Control typePosition, draft (top link sensing) and mix control
Lift capacity (at ends)1,900 kg (4,190 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO spped540 rpm
Hydraulic system
Hydraulic typeOpen center
Pressure2,770 psi (191 bar)
Valves1 to 3
Pump flow11.0 gpm (41.6 lpm)
Steering flow6.1 gpm (23.1 lpm)
Total flow17.1 gpm (64.7 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.