Kubota M59

Kubota M59The Kubota M59 is a 4WD backhoe loader tractor from the M series. This tractor was manufactured by Kubota from 2008 to 2015. The Kubota M59 is equipped with a 2.4 L four-cylinder diesel engine and hydrostatic transmission with infinite (6-range) forward and reverse gears.

The Kubota M59 backhoe loader tractor used the V2403 engine. It is a 2.4 L, 2,434 cm2, (148.5 cu·in) four-cylinder turbocharged diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 102.4 mm (4.03 in) of the piston stroke. This engine produced 59.8 PS (44.0 kW; 59.0 HP) at 2,700 rpm of net output power.

The Kubota M59 is equipped with hydrostatic power steering, wet disc type brakes, four-post ROPS with FOPS canopy and 55.0 liters (14.5 US gal.; 12.1 Imp. gal) fuel tank.

Following attachments are available for the Kubota M59 backhoe loader tractor:

  • Kubota loader
  • Kubota backhoe

Kubota M59 Specifications

General Specifications
Model Kubota M59
Length 6,490 mm (255.5 in)
Width 1,900 mm (74.8 in)
Height 2,550 mm (100.4 in)
Wheel base 2,040 mm (80.3 in)
Weight (with loader and backhoe) 3,785 kg (8,344 lbs)
Fuel tank capacity 55.0 liters (14.5 US gal.; 12.1 Imp. gal)
Battery 12V, 80Ah
Cabin type Four-post ROPS with FOPS canopy
Engine model V2403
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.4 L, 2434 cm2, (148.5 cu·in)
Bore and stroke 87.0 mm X 102.4 mm (3.43 in X 4.03 in)
Horsepower 59.8 PS (44.0 kW; 59.0 HP) at 2,700 rpm
Starter Electric
Oil capacity: 9.4 L (9.9 US. qt, 8.3 Imp. qt.)
Coolant capacity: 8.2 L (8.7 US. qt, 7.2 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc type
Differential lock Rear standard
Transmission model HST Plus
Transmission type Hydrostatic
Gears Infinite (6-range) forward and reverse
Speed Forward: 25.6 kmh (15.9 mph) Reverse: 25.6 (15.9 mph)
Transmission oil capacity 45.0 L (11.9 US. gal, 9.9 Imp. gal.)
Front tires Lawn/turf: 11-16
Industrial: 10×16.5
Rear tires Lawn/turf: 16.9L-24
Industrial: 17.5L-24
Three-Point Hitch
Caterogy II/I (optional)
Control type Position control
Lift capacity (at ends) 1,750 kg (3,860 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 45.0 L (47.55 US. qt, 39.59 Imp. qt.)
Total flow 26.7 gpm (101.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.