The Kubota L2500 is a 2WD (L2500F) or 4WD (L2500DT) compact utility tractor from the L series. This tractor was manufactured by the Kubota from 1998 to 2000. The Kubota L2500 is equipped with a 1.4 L three-cylinder diesel engine and sliding gear transmission with 8 forward and 2 reverse gears.
The Kubota L2500 compact utility tractor used the Kubota D1403 diesel engine. It is a 1.4 L, 1,393 cm2, (85.0 cu·in) three-cylinder natural aspirated diesel engine with 80.0 mm (3.15 in) of the cylinder bore and 92.4 mm (3.64 in) of the piston stroke. This engine produced 28.6 PS (21.0 kW; 28.0 HP) at 2,800 rpm of gross output power.
The Kubota L2500 is equipped with integral type power steering, mechanical wet disc brakes, open operator station with two-post ROPS and 29.0 liters (7.7 US gal.; 6.4 Imp. gal) fuel tank.
Following attachments are available for the Kubota L2500 compact utility tractor:
- Kubota LA450S loader
- Kubota LB400 loader
Kubota L2500 Specifications
General Specifications | |
Model | Kubota L2500 |
Length | 2,630 mm (103.5 in) |
Width | 1,270 mm (50 in) |
Height | 2,110 mm (83.1 in) |
Wheel base | 1,550 mm (61 in) |
Weight | 1,220 kg (2,690 lbs) |
Fuel tank capacity | 29.0 liters (7.7 US gal.; 6.4 Imp. gal) |
Battery | 12V, 65Ah |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | Kubota D1403 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.4 L, 1,393 cm2, (85.0 cu·in) |
Bore and stroke | 80.0 mm X 92.4 mm (3.15 in X 3.64 in) |
Horsepower | 28.6 PS (21.0 kW; 28.2 HP) at 2,800 rpm |
Starter | Electric |
Coolant capacity: | 6.1 L (6.4 US. qt, 5.4 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Integral type power |
Brakes | Mechanical wet disc |
Transmission model | – |
Transmission type | Sliding gear |
Gears | 8 forward and 2 reverse |
Speed | Forward: 17.8 kmh (11.1 mph) Reverse: 9.4 (5.8 mph) |
Tires | |
Front tires | Ag: 5.00-15 (2WD), 7.00-15 (4WD) |
Rear tires | Ag: 11.2-24 |
Three-Point Hitch | |
Caterogy | I |
Control type | Position control, draft control (option) |
Lift capacity (at ends) | 906 kg (1,998 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pressure | 2205 psi (152 bar) |
Pump flow | 7.2 gpm (27.3 lpm) |