Oliver 1750

Oliver 1750The Oliver 1750 is a 2WD or 4WD row-crop tractor from the 50 series. This tractor was manufactured by Oliver in Charles City, Iowa, USA from 1966 to 1969.

The Oliver 1750 is equipped with one of two engines: a 4.6 L (283.0 cu·in) six-cylinder gasoline engine or a 5.1 L (310.0 cu·in) six-cylinder diesel engine and one of three transmissions: unsynchronized gear transmission with 6 forward and 2 reverse gears, partial power shift transmission with 12 forward and 4 reverse gears or partial power shift transmission with 18 forward and 6 reverse gears.

The tractor could be equipped with the following engines:

  • Waukesha-Oliver (gasoline). It is a 4.6 L, 4,638 cm2, (283.0 cu·in) six-cylinder natural aspirated gasoline engine with 98.0 mm (3.86 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 8.5:1. This engine produced 81.2 PS (59.7 kW; 80.1 HP) at 2,400 rpm of PTO output power.
  • Waukesha-Oliver (diesel). It is a 5.1 L, 5,080 cm2, (310.0 cu·in) six-cylinder natural aspirated diesel engine. The cylinder bore is 98.0 mm (3.86 in) and the piston stroke is 111.0 mm (4.37 in). The compression ratio rating is 16.0:1. This engine produced 81.2 PS (59.7 kW; 80.1 HP) at 2,400 rpm of PTO output power.

The Oliver 1750 is equipped with power assist steering, differential mechanical disc brakes, open operator station or Oliver Continental cab (optional), and 130.6 liters (34.5 US gal.; 28.7 Imp. gal) fuel tank for gas fuel or 119.2 liters (31.5 US gal, 26.2 Imp. gal) for diesel.

Following attachments are available for the Oliver 1750 row-crop tractor:

  • Oliver 1610 loader
  • Oliver 1810 loader

Oliver 1750 Specifications

General Specifications
Model Oliver 1750
Length 2WD: 4,050 mm (159.4 in)
4WD: 3,870 mm (152.4 in)
Width 2,040 mm (80.3 in)
Height (steering wheel) 2WD: 2,160 mm (85 in)
4WD: 2,170 mm (85.4 in)
Wheel base 2WD: 2,610 mm (102.8 in)
4WD: 2,190 mm (86.2 in)
Ground clearance 640 mm (25.2 in)
Weight (shipping) 2WD: 3,930 kg (8,664 lbs)
4WD: 4,835 kg (10,659 lbs)
Fuel tank capacity Gas: 130.6 liters (34.5 US gal.; 28.7 Imp. gal)
Diesel: 119.2 liters (31.5 US gal, 26.2 Imp. gal)
Battery
Cabin type Open operator station or Oliver Continental Cab (optional)
Engine
Engine model Waukesha-Oliver
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Gasoline
Displacement 4.6 L, 4,638 cm2, (283.0 cu·in)
Bore and stroke 98.0 mm X 102.0 mm (3.86 in X 4.02 in)
Compression ratio 8.5:1
Horsepower 81.2 PS (59.7 kW; 80.1 HP) at 2,400 rpm
Starter Electric
Oil capacity: 7.6 L (8 US. qt, 6.7 Imp. qt.)
Coolant capacity: 18.9 L (20 US. qt, 16.6 Imp. qt.)
Engine
Engine model Waukesha-Oliver
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.1 L, 5,080 cm2, (310.0 cu·in)
Bore and stroke 98.0 mm X 111.0 mm (3.86 in X 4.37 in)
Compression ratio 16.0:1
Horsepower 81.2 PS (59.7 kW; 80.1 HP) at 2,400 rpm
Starter Electric
Oil capacity: 11.4 L (12 US. qt, 10 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power assist
Brakes Differential mechanical disc
Transmission model
Transmission type Unsynchronized gear
Gears 6 forward and 2 reverse
Speed Forward: 23.2 kmh (14.4 mph) Reverse: 7.9 kmh (4.9 mph)
Transmission model Oliver Hydra-Power
Transmission type Partial power shift with dry disc clutch
Gears 12 forward and 4 reverse
Speed Forward: 23.3 kmh (14.5 mph) Reverse: kmh (0 mph)
Transmission model Hydraul-Shift
Transmission type Partial power shift
Gears 18 forward and 6 reverse
Tires
Front tires Ag: 7.50-15
Rear tires Ag: 18.4-34
Three-Point Hitch
Category II or III
Control type
Lift capacity (at 610 mm/24 in) 2720 kg (5998 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 18.9 L (5 US. gal, 4.2 Imp. gal.)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*