The Oliver 2150 is a 2WD or 4WD row-crop tractor from the 50 series. This tractor was manufactured by Oliver in Charles City, Iowa, USA from 1968 to 1969. The Oliver 2150 is equipped with a 7.8 L (478.0 cu·in) six-cylinder diesel engine and one of two transmissions: a unsynchronized gear transmission with 6 forward and 2 reverse gears or a partial powershift transmission with 18 forward and 6 reverse gears.
The Oliver 2150 row-crop tractor used the Oliver-Hercules engine. It is a 7.8 L, 7,833 cm2, (478.0 cu·in) six-cylinder natural aspirated diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 124.0 mm (4.88 in) of the piston stroke. The compression ratio rating is 18.0:1. This engine produced 132.9 PS (97.7 kW; 131.0 HP) at 2,400 rpm of output power.
The Oliver 2150 is equipped with power steering, independent dry disc brakes, an open operator station or cab (optional), and 104.1 liters (27.5 US gal.; 22.9 Imp. gal) fuel tank.
Oliver 2150 Specifications
| General Specifications | |
| Model | Oliver 2150 |
| Length | 4,120 mm (162.2 in) |
| Width | – |
| Height (steering wheel) | 2,170 mm (85.4 in) |
| Wheel base | 2,480 mm (97.6 in) |
| Ground clearance | 480 mm (18.9 in) |
| Weight | 5,890 kg (12,985 lbs) |
| Fuel tank capacity | 104.1 liters (27.5 US gal.; 22.9 Imp. gal) |
| Battery | – |
| Cabin type | Open operator station or Cab (optional) |
| Engine | |
| Engine model | Oliver-Hercules |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 7.8 L, 7,833 cm2, (478.0 cu·in) |
| Bore and stroke | 116.0 mm X 124.0 mm (4.57 in X 4.88 in) |
| Compression ratio | 18.0:1 |
| Horsepower | 132.9 PS (97.7 kW; 131.0 HP) at 2,400 rpm |
| Starter | Electric |
| Oil capacity: | 18.0 L (19 US. qt, 15.8 Imp. qt.) |
| Coolant capacity: | 26.5 L (28 US. qt, 23.3 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Independent dry disc |
| Final drive | Planetary |
| Transmission model | – |
| Transmission type | Unsynchronized gear with cerametallic disc clutch |
| Gears | 6 forward and 2 reverse |
| Speed | Forward: 22.4 kmh (13.9 mph) Reverse: 8.4 kmh (5.2 mph) |
| Transmission model | Hydraul-Shift |
| Transmission type | Partial powershift with cerametallic disc clutch |
| Gears | 18 forward and 6 reverse |
| Speed | Forward: 27.1 kmh (16.8 mph) Reverse: 8.4 kmh (5.2 mph) |
| Tires | |
| Front tires | Ag: 11.00-16 |
| Rear tires | Ag: 18.4-38, 23.1-34, 24.5-32 |
| Three-Point Hitch | |
| Category | III |
| Control type | Position and draft control |
| Lift capacity (at ends) | 2,720 kg (6,000 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 1000, 540/1000 rpm |
Be the first to comment