The Cub Cadet i1042 is a 2WD zero-turn mower from the iSeries. This tractor was manufactured by Cub Cadet (a part of MTD) during 2009. The Cub Cadet i1042 is equipped with a 0.5 L (32.6 cu·in) single-cylinder gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.
The Cub Cadet i1042 zero-turn mower used the Kohler SV540 engine. It is a 0.5 L, 534 cm2, (32.6 cu·in) single-cylinder natural aspirated gasoline engine with 89.0 mm (3.5 in) of the cylinder bore and 86.0 mm (3.39 in) of the piston stroke. This engine produced 18.2 PS (13.4 kW; 18.0 HP) at 3,600 rpm of output power.
The Cub Cadet i1042 is equipped with differential steering, disc brakes, and an open operator station.
Following attachments are available for the Cub Cadet i1042 zero-turn mower:
- Mid-mount Cub Cadet 1,060 mm (42 in) mower deck with 2-blades
- Front-mount Cub Cadet 1,060 mm (42 in) snowblower
Cub Cadet i1042 Specifications
| General Specifications | |
| Model | Cub Cadet i1042 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | – |
| Weight | – |
| Fuel tank capacity | – |
| Battery | 12V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Kohler SV540 |
| Engine type | Four-stroke, air-cooled |
| Cylinders | 1 |
| Fuel type | Gasoline |
| Displacement | 0.5 L, 534 cm2, (32.6 cu·in) |
| Bore and stroke | 89.0 mm X 86.0 mm (3.5 in X 3.39 in) |
| Horsepower | 18.2 PS (13.4 kW; 18.0 HP) at 3,600 rpm |
| Starter | Electric |
| Oil type | SAE 10W-30 |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Differential |
| Brakes | Disc |
| Transmission model | Hydro-Gear EZT |
| Transmission type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
| Tires | |
| Front tires | Lawn/turf: 15x5x6 |
| Rear tires | Lawn/turf: 20x8x8 |
Be the first to comment