Cub Cadet i1042

Cub Cadet i1042The Cub Cadet i1042 is a 2WD zero-turn mower from the iSeries. This tractor was manufactured by Cub Cadet (a part of MTD) during 2009. The Cub Cadet i1042 is equipped with a 0.5 L (32.6 cu·in) single-cylinder gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet i1042 zero-turn mower used the Kohler SV540 engine. It is a 0.5 L, 534 cm2, (32.6 cu·in) single-cylinder natural aspirated gasoline engine with 89.0 mm (3.5 in) of the cylinder bore and 86.0 mm (3.39 in) of the piston stroke. This engine produced 18.2 PS (13.4 kW; 18.0 HP) at 3,600 rpm of output power.

The Cub Cadet i1042 is equipped with differential steering, disc brakes, and an open operator station.

Following attachments are available for the Cub Cadet i1042 zero-turn mower:

  • Mid-mount Cub Cadet 1,060 mm (42 in) mower deck with 2-blades
  • Front-mount Cub Cadet 1,060 mm (42 in) snowblower

Cub Cadet i1042 Specifications

General Specifications
Model Cub Cadet i1042
Length
Width
Height
Wheel base
Weight
Fuel tank capacity
Battery 12V
Cabin type Open operator station
Engine
Engine model Kohler SV540
Engine type Four-stroke, air-cooled
Cylinders 1
Fuel type Gasoline
Displacement 0.5 L, 534 cm2, (32.6 cu·in)
Bore and stroke 89.0 mm X 86.0 mm (3.5 in X 3.39 in)
Horsepower 18.2 PS (13.4 kW; 18.0 HP) at 3,600 rpm
Starter Electric
Oil type SAE 10W-30
Transmission and chassis
Chassis 4×2 2WD
Steering type Differential
Brakes Disc
Transmission model Hydro-Gear EZT
Transmission type Belt-driven hydrostatic
Gears Infinite forward and reverse
Tires
Front tires Lawn/turf: 15x5x6
Rear tires Lawn/turf: 20x8x8