John Deere 9300

John Deere 9300The John Deere 9300 is a 4WD four-wheel drive from the 9000 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1997 to 2001. The John Deere 9300 is equipped with a 12.5 L (765.0 cu·in) six-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 12 forward and 3 reverse gears, a partial power shift transmission with 24 forward and 6 reverse gears or a full power shift transmission with 12 forward and 2 reverse gears.

The JD 9300 four-wheel drive used the John Deere engine. It is a 12.5 L, 12,536 cm2, (765.0 cu·in) six-cylinder turbocharged aftercooled diesel engine with 127.0 mm (5 in) of the cylinder bore and 165.0 mm (6.5 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 365.2 PS (268.5 kW; 360.0 HP) of output power.

The John Deere 9300 is equipped with hydrostatic power steering, hydraulic wet disc brakes, cab (standard), and 1022 liters (270 US gal.; 224.8 Imp. gal) fuel tank.

John Deere 9300 Specifications

General Specifications
Model John Deere 9300
Length 6,950 mm (273.6 in)
Width 4,290 mm (168.9 in)
Height (cab) 3,490 mm (137.4 in)
Wheel base –
Ground clearance (axles) 730 mm (28.7 in)
Weight 14,260 kg (31,438 lbs)
Fuel tank capacity 1022 liters (270 US gal.; 224.8 Imp. gal)
Battery Three 12V, CCA 925A
Cabin type Cab (standard)
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 12.5 L, 12,536 cm2, (765.0 cu·in)
Bore and stroke 127.0 mm X 165.0 mm (5 in X 6.5 in)
Compression ratio 16.0:1
Horsepower 365.2 PS (268.5 kW; 360.0 HP)
Starter Electric
Oil capacity: 41.6 L (44 US. qt, 36.6 Imp. qt.)
Coolant capacity: 60.6 L (64 US. qt, 53.3 Imp. qt.)
Transmission and chassis
Chassis 4×4 articulated 4WD
Steering type Hydrostatic power
Brakes Hydraulic wet disc
Transmission model John Deere Syncro
Transmission type Partially synchronized
Gears 12 forward and 3 reverse
Speed Forward: 30.6 kmh (19 mph) Reverse: 9.8 kmh (6.1 mph)
Transmission model John Deere PowrSync
Transmission type Partial power shift
Gears 24 forward and 6 reverse
Speed Forward: 36.5 kmh (22.7 mph) Reverse: 11.7 kmh (7.3 mph)
Transmission model John Deere PowerShift
Transmission type Full power shift
Gears 12 forward and 2 reverse
Speed Forward: 29.8 kmh (18.5 mph) Reverse: 9.0 kmh (5.6 mph)
Tires
Front tires Ag: 620/70R42
Rear tires Ag: 620/70R42
Three-Point Hitch
Category III
Control type –
Lift capacity (at ends) 6,290 kg (13,870 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000 rpm
Hydraulic system
Hydraulic type Closed center PFC
Hydraulic capacity 98.4 L (26 US. gal, 21.6 Imp. gal.)
Pressure 2900 psi (199.9 bar)
Valves 3 to 5
Pump flow 35.0 gpm (132.5 lpm)
Total flow 44.0 gpm (166.6 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*