The Toro Z420 is a 2WD zero-turn mower from the TimeCutter Z series. This tractor was manufactured by Toro from 2005 to 2006. The Toro Z420 is equipped with a 0.5 L (28.4 cu·in) single-cylinder gasoline engine and a hydrostatic transmission with infinite forward and reverse gears.
The Toro Z420 zero-turn mower used the Briggs & Stratton 286H77 engine. It is a 0.5 L, 465 cm2, (28.4 cu·in) single-cylinder natural aspirated gasoline engine with 87.0 mm (3.43 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. This engine produced 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm of output power.
The Toro Z420 is equipped with power steering, an open operator station, 7.6 liters (2.0 US gal.; 1.7 Imp. gal) fuel tank, and mid-mount Toro 42 inches (1,060 mm) mower deck with 2-blade with manual lift.
Toro Z420 Specifications
| General Specifications | |
| Model | Toro Z420 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | – |
| Weight | – |
| Fuel tank capacity | 7.6 liters (2 US gal.; 1.7 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Briggs & Stratton 286H77 |
| Engine type | Four-stroke, air-cooled |
| Cylinders | 1 |
| Fuel type | Gasoline |
| Displacement | 0.5 L, 465 cm2, (28.4 cu·in) |
| Bore and stroke | 87.0 mm X 78.0 mm (3.43 in X 3.07 in) |
| Horsepower | 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Power |
| Brakes | – |
| Transmission model | Hydro-Gear |
| Transmission type | Hydrostatic |
| Gears | Infinite forward and reverse |
| Speed | Forward: 9.7 kmh (6 mph) Reverse: 5.5 kmh (3.4 mph) |
| Tires | |
| Front tires | Lawn/turf: 10×4 |
| Rear tires | Lawn/turf: 18×7.5 |
| PTO (Power take-off shaft) | |
| Middle PTO type | Independent with electric clutch |
| Middle PTO speed | – |
Be the first to comment