The Mahindra 2540 is a 4WD compact utility tractor manufactured by TYM for distributor Mahindra since 2016. The Mahindra 2540 is equipped with a 2.7 L (166.7 cu·in) four-cylinder diesel engine and a shuttle transmission with 12 forward and 12 reverse gears.
The Mahindra 2540 compact utility tractor used the Mahindra engine. It is a 2.7 L, 2,732 cm2, (166.7 cu·in) four-cylinder natural aspirated diesel engine with 89.0 mm (3.5 in) of the cylinder bore and 100.0 mm (3.94 in) of the piston stroke. The compression ratio rating is 19.5:1. This engine produced 40.5 PS (29.8 kW; 40.0 HP) at 2,600 rpm of output power.
The Mahindra 2540 is equipped with power steering, wet disc brakes, Two-post foldable ROPS, and 60.6 liters (16 US gal.; 13.3 Imp. gal) fuel tank.
Following attachments are available for the Mahindra 2540 compact utility tractor:
- Mahindra 2540L loader
- Mahindra 2540B backhoe
Mahindra 2540 Specifications
| General Specifications | |
| Model | Mahindra 2540 |
| Length | 3,030 mm (119.3 in) |
| Width | 1,510 mm (59.4 in) |
| Height (ROPS) | 2,390 mm (94.1 in) |
| Wheel base | – |
| Weight | 1,490 kg (3,285 lbs) |
| Fuel tank capacity | 60.6 liters (16 US gal.; 13.3 Imp. gal) |
| Battery | 12V, 96Ah |
| Cabin type | Two-post foldable ROPS |
| Engine | |
| Engine model | Mahindra |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 2.7 L, 2,732 cm2, (166.7 cu·in) |
| Bore and stroke | 89.0 mm X 100.0 mm (3.5 in X 3.94 in) |
| Compression ratio | 19.5:1 |
| Horsepower | 40.5 PS (29.8 kW; 40.0 HP) at 2,600 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Transmission model | – |
| Transmission type | Shuttle with dry disc clutch |
| Gears | 12 forward and 12 reverse |
| Tires | |
| Front tires | Ag: 8.3×16 Industrial: 10-16.5 |
| Rear tires | Ag: 12.4×24 Industrial: 43×16-20 |
| Three-Point Hitch | |
| Category | I |
| Control type | Position control |
| Lift capacity (at ends) | 1,200 kg (2,645 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 1 or 2 |
| Pump flow | 8.2 gpm (31 lpm) |
| Steering flow | 4.5 gpm (17 lpm) |
Be the first to comment