New Holland TC25

New Holland TC25The New Holland TC25 is a 2WD or 4WD compact utility tractor from the Boomer TC series. This tractor was manufactured by New Holland from 1999 to 2003. The New Holland TC25 is equipped with a 1.3 L (81.2 cu·in) three-cylinder diesel engine and one of two transmissions: a gear type transmission with 9 forward and 3 reverse gears or a hydrostatic transmission with infinite forward and reverse gears.

The New Holland TC25 compact uutility tractor used the Shibura engine. It is a 1.3 L, 1,330 cm2, (81.2 cu·in) three-cylinder natural aspirated diesel engine. This engine produced 25.3 PS (18.6 kW; 24.9 HP) at 2,600 rpm of output power.

The New Holland TC25 is equipped with hydrostatic power steering, two-post ROPS and 27.6 liters (7.3 US gal.; 6.1 Imp. gal) fuel tank.

NH TC25 variants:

  • TC25 – base model
  • TC25D – deluxe

New Holland TC25 Specifications

General Specifications
Model New Holland TC25
Length 2WD: 2,700 mm (106.3 in)
4WD: 2,690 mm (105.9 in)
Width 1,370 mm (53.9 in)
Height (ROPS) 2,230 mm (87.8 in)
Wheel base 1,600 mm (63 in)
SuperSteer: 1,820 mm (71.7 in)
Ground clearance 350 mm (13.8 in)
Weight (shipping) 2WD: 1,060 kg (2,337 lbs)
4WD: 1,122 kg (2,474 lbs)
Fuel tank capacity 27.6 liters (7.3 US gal.; 6.1 Imp. gal)
Battery 12V
Cabin type Two-post ROPS
Engine
Engine model Shibura
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.3 L, 1,330 cm2, (81.2 cu·in)
Bore and stroke mm X mm (0 in X 0 in)
Horsepower 25.3 PS (18.6 kW; 24.9 HP) at 2,600 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes –
Transmission model
Transmission type Gear type
Gears 9 forward and 3 reverse
Transmission model
Transmission type Hydrostatic
Gears Infinite forward and reverse
Tires
Front tires Ag: 5.50-16 (2WD), 7×14 (4WD)
Lawn/turf: 23×8.50-12 (2WD), 23×8.50-14 (4WD)
Rear tires Ag: 11.2-24
Lawn/turf: 13.6×16
Three-Point Hitch
Category I
Control type –
Lift capacity (at ends) 741 kg (1,634 lbs)
PTO (Power take-off shaft)
Middle PTO type Optional
Middle PTO speed 2000 rpm
Rear PTO type Transmission (gear) or live (hydro)
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type –
Pump flow TC25: 6.1 gpm (23.1 lpm)
TC25D: 7.1 gpm (26.9 lpm)
Steering flow TC25: 3.5 gpm (13.2 lpm)
TC25D: 5.1 gpm (19.3 lpm)
Total flow TC25: 10.1 gpm (38.2 lpm)
TC25D: 12.7 gpm (48.1 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*