The New Holland TC25 is a 2WD or 4WD compact utility tractor from the Boomer TC series. This tractor was manufactured by New Holland from 1999 to 2003. The New Holland TC25 is equipped with a 1.3 L (81.2 cu·in) three-cylinder diesel engine and one of two transmissions: a gear type transmission with 9 forward and 3 reverse gears or a hydrostatic transmission with infinite forward and reverse gears.
The New Holland TC25 compact uutility tractor used the Shibura engine. It is a 1.3 L, 1,330 cm2, (81.2 cu·in) three-cylinder natural aspirated diesel engine. This engine produced 25.3 PS (18.6 kW; 24.9 HP) at 2,600 rpm of output power.
The New Holland TC25 is equipped with hydrostatic power steering, two-post ROPS and 27.6 liters (7.3 US gal.; 6.1 Imp. gal) fuel tank.
NH TC25 variants:
- TC25 – base model
- TC25D – deluxe
New Holland TC25 Specifications
General Specifications | |
Model | New Holland TC25 |
Length |
2WD: 2,700 mm (106.3 in) 4WD: 2,690 mm (105.9 in) |
Width | 1,370 mm (53.9 in) |
Height (ROPS) | 2,230 mm (87.8 in) |
Wheel base | 1,600 mm (63 in) SuperSteer: 1,820 mm (71.7 in) |
Ground clearance | 350 mm (13.8 in) |
Weight (shipping) |
2WD: 1,060 kg (2,337 lbs) 4WD: 1,122 kg (2,474 lbs) |
Fuel tank capacity | 27.6 liters (7.3 US gal.; 6.1 Imp. gal) |
Battery | 12V |
Cabin type | Two-post ROPS |
Engine | |
Engine model | Shibura |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.3 L, 1,330 cm2, (81.2 cu·in) |
Bore and stroke | mm X mm (0 in X 0 in) |
Horsepower | 25.3 PS (18.6 kW; 24.9 HP) at 2,600 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | – |
Transmission model | |
Transmission type | Gear type |
Gears | 9 forward and 3 reverse |
Transmission model | |
Transmission type | Hydrostatic |
Gears | Infinite forward and reverse |
Tires | |
Front tires | Ag: 5.50-16 (2WD), 7×14 (4WD) Lawn/turf: 23×8.50-12 (2WD), 23×8.50-14 (4WD) |
Rear tires | Ag: 11.2-24 Lawn/turf: 13.6×16 |
Three-Point Hitch | |
Category | I |
Control type | – |
Lift capacity (at ends) | 741 kg (1,634 lbs) |
PTO (Power take-off shaft) | |
Middle PTO type | Optional |
Middle PTO speed | 2000 rpm |
Rear PTO type | Transmission (gear) or live (hydro) |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | – |
Pump flow |
TC25: 6.1 gpm (23.1 lpm) TC25D: 7.1 gpm (26.9 lpm) |
Steering flow |
TC25: 3.5 gpm (13.2 lpm) TC25D: 5.1 gpm (19.3 lpm) |
Total flow |
TC25: 10.1 gpm (38.2 lpm) TC25D: 12.7 gpm (48.1 lpm) |