The John Deere 3055 is a 2WD utility tractor manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1992 to 1993. The John Deere 3055 is equipped with a 5.9 L (359.0 cu·in) six-cylinder diesel engine and a TSS high-low transmission with 16 forward and 8 reverse gears.
The JD 3055 utility tractor used the John Deere engine. It is a 5.9 L, 5,883 cm2, (359.0 cu·in) six-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 106.5 PS (78.3 kW; 105.0 HP) at 2,300 rpm of output power.
The John Deere 3055 is equipped with power steering, hydraulic wet disc brakes, four-post ROPS or Sound-Gard body and cab optional and 120.0 liters (31.7 US gal.; 26.4 Imp. gal) fuel tank.
John Deere 3055 Specifications
| General Specifications | |
| Model | John Deere 3055 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,550 mm (100.4 in) |
| Weight (shipping) | ROPS: 3,836 kg (8,457 lbs) Cab: 4,125 kg (9,094 lbs) |
| Fuel tank capacity | 120.0 liters (31.7 US gal.; 26.4 Imp. gal) |
| Battery | 12V |
| Cabin type | Four-post ROPS or Sound-Gard body and cab optional. |
| Engine | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 5.9 L, 5,883 cm2, (359.0 cu·in) |
| Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
| Horsepower | 106.5 PS (78.3 kW; 105 HP) at 2,300 rpm |
| Starter | Electric |
| Coolant capacity: | 4.3 L (4.5 US. qt, 3.8 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Power |
| Brakes | Hydraulic wet disc |
| Final drive | Inboard planetary |
| Differential lock | Rear lock (standard) |
| Transmission model | |
| Transmission type | TSS High-Low |
| Gears | 16 forward and 8 reverse |
| Tires | |
| Front tires | Ag: 10.00-16 |
| Rear tires | Ag: 18.4-34 |
| Three-Point Hitch | |
| Category | II |
| Control type | Lower-link draft sensing |
| Lift capacity (at 24 in/610 mm) | 2375 kg (5237 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center |
| Hydraulic capacity | 50.0 L (13.2 US. gal, 11 Imp. gal.) |
| Valves | 1 to 3 |
| Pump flow | 21.0 gpm (79.5 lpm) |
Be the first to comment