The John Deere 9360R is a 4WD four-wheel drive tractor from the 9R/RT series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2012 to 2014. The John Deere 9360R is equipped with a 9.0 L (548.7 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 24 forward and 6 reverse gears or a full power shift transmission with 18 forward and 6 reverse gears.
The JD 9360R four-wheel drive used the John Deere PowerTech PSX engine. It is a 9.0 L, 8,991 cm2, (548.7 cu·in) six-cylinder turbocharged diesel engine with 118.0 mm (4.65 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 365.2 PS (268.5 kW; 360.0 HP) at 2,100 rpm of output power.
The John Deere 9360R is equipped with hydrostatic power steering, hydraulic wet disc brakes, CommandView II cab (standard) and 1324.8 liters (350 US gal.; 291.4 Imp. gal) fuel tank.
John Deere 9360R Specifications
| General Specifications | |
| Model | John Deere 9360R |
| Length | 7,160 mm (281.9 in) |
| Width | 3,040 mm (119.7 in) |
| Height (cab) | 3,630 mm (142.9 in) |
| Wheel base | 3,500 mm (137.8 in) |
| Weight (operating) | 17,100 kg (37,699 lbs) |
| Fuel tank capacity | 1324.8 liters (350 US gal.; 291.4 Imp. gal) |
| Battery | Three 12V, CCA 925A |
| Cabin type | CommandView II cab (standard) |
| Engine | |
| Engine model | John Deere PowerTech PSX |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 9.0 L, 8,991 cm2, (548.7 cu·in) |
| Bore and stroke | 118.0 mm X 136.0 mm (4.65 in X 5.35 in) |
| Compression ratio | 16.0:1 |
| Horsepower | 365.2 PS (268.5 kW; 360.0 HP) at 2,100 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 articulated 4WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Final drive | Inboard planetary |
| Differential lock | Fully-locking electro-hydraulic |
| Transmission model | John Deere PowrSync |
| Transmission type | Partial power shift with hydraulic wet disc clutch |
| Gears | 24 forward and 6 reverse |
| Speed | Forward: 38.6 kmh (24 mph) Reverse: 12.3 kmh (7.6 mph) |
| Transmission model | John Deere PowerShift |
| Transmission type | Full power shift with hydraulic wet disc clutch |
| Gears | 18 forward and 6 reverse |
| Speed | Forward: 40.2 kmh (25 mph) Reverse: 12.8 kmh (8 mph) |
| Tires | |
| Front tires | Ag: 620/70R42 |
| Rear tires | Ag: 620/70R42 |
| Three-Point Hitch | |
| Category | IVN/III, IVN/IV |
| Control type | Electronic draft sensing |
| Lift capacity | 6,940 kg (15,300 lbs) Optional: 9,070 kg (20,000 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 1000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center pressure flow compensated (PFC) |
| Pressure | 2900 psi (200 bar) |
| Valves | 4 to 6 |
| Pump flow | 44.0 gpm (166.6 lpm) PowerShift: 48.0 gpm (181.7 lpm) High-Flow: 78.0 gpm (295.3 lpm) |
| SCV flow | 37.0 gpm (140.0 lpm) 19.1mm SCV: 45.0 gpm (170.3 lpm) |
Be the first to comment